OpenWrt Forum Archive

Topic: Meraki MR-24

The content of this topic has been archived on 19 Mar 2018. There are no obvious gaps in this topic, but there may still be some posts missing at the end.

I am current running 4 MR-24 in a very simple setup.  The set up is 1 wds master that connects 3 wds clients.  Everything is working like a charm.  How do I determine the version of code that on, and what is the best version of code to run on?

Any advise would help.
RC

wcarterjr68 wrote:

How do I determine the version of code that on

Sign into the web page, or sign in via SSH. The main status web page and the SSH banner will both tell you what version you're using.


wcarterjr68 wrote:

and what is the best version of code to run on?

The latest release version for your hardware.

This is the status page on me MR24 main device.

System
Hostname    OpenWrtAP0
Model    Meraki MR24 Access Point
Firmware Version    OpenWrt SNAPSHOT r5603-0fca474 / LuCI Master (git-17.362.44569-463c72a)
Kernel Version    4.9.70
Local Time    Mon Mar 19 07:54:52 2018
Uptime    2d 16h 19m 29s
Load Average    0.00, 0.00, 0.00

Thanks!
RC

This is from telnet prompt as well.

BusyBox v1.27.2 () built-in shell (ash)

  _______                     ________        __
|       |.-----.-----.-----.|  |  |  |.----.|  |_
|   -   ||  _  |  -__|     ||  |  |  ||   _||   _|
|_______||   __|_____|__|__||________||__|  |____|
          |__| W I R E L E S S   F R E E D O M
-----------------------------------------------------
OpenWrt SNAPSHOT, r5603-0fca474
-----------------------------------------------------
root@OpenWrtAP0:~#

Thanks,
RC

The discussion might have continued from here.