Topic: meraki MX60

Hello,

i  have trief to install openwrt/lede on a meraki MX60.
It loads the initramfs image and then after "Verifying Checksum ... OK"
i get this failure:
  Wring Ramdisk IMage Format
Ramdisk image is corrupt or invalid


Please help to get lede running.

Re: meraki MX60

now i can bootm the mx60

but i get the following error:

VFS: Cannot open root device "(null)" or unknown-block(0,0): error -6
[    3.802956] Please append a correct "root=" boot option; here are the available partitions:
[    3.811285] 1f00            1024 mtdblock0
[    3.811288]  (driver?)
[    3.817812] 1f01            1024 mtdblock1
[    3.817814]  (driver?)
[    3.824336] 1f02             256 mtdblock2
[    3.824338]  (driver?)
[    3.830859] 1f03         1046272 mtdblock3
[    3.830861]  (driver?)
[    3.837382] 1f04         1048576 mtdblock4
[    3.837384]  (driver?)
[    3.843904] Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0)
[    3.853094] Rebooting in 1 seconds..