NO! sorry. Still no third radio. Using your r5917 build downloaded moments ago
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 4.9.77 (davidc502@pc2) (gcc version 5.5.0 (OpenWrt GCC 5.5.0 r5917-36f1978a70) ) #0 SMP Sat Jan 20 22:36:05 2018
[ 0.000000] CPU: ARMv7 Processor [414fc091] revision 1 (ARMv7), cr=10c5387d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] OF: fdt:Machine model: Linksys WRT3200ACM
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] On node 0 totalpages: 131072
[ 0.000000] free_area_init_node: node 0, pgdat c065b240, node_mem_map dfbf9000
[ 0.000000] Normal zone: 1024 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 131072 pages, LIFO batch:31
[ 0.000000] percpu: Embedded 13 pages/cpu @dfbce000 s22796 r8192 d22260 u53248
[ 0.000000] pcpu-alloc: s22796 r8192 d22260 u53248 alloc=13*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 130048
[ 0.000000] Kernel command line: console=ttyS0,115200 root=/dev/mtdblock6 ro rootdelay=1 rootfstype=jffs2 earlyprintk mtdparts=armada-nand:2048K(uboot)ro,128K(u_env),256K(s_env),256K@8064K(devinfo),1920K@8320K(sysdiag),80m@10m(kernel),74m@16m(rootfs),80m@90m(alt_kernel),74m@96m(alt_rootfs),160m@10m(ubifs),-@170m(syscfg)
[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Memory: 512764K/524288K available (4609K kernel code, 182K rwdata, 1256K rodata, 284K init, 310K bss, 11524K reserved, 0K cma-reserved, 0K highmem)
[ 0.000000] Virtual kernel memory layout:
vector : 0xffff0000 - 0xffff1000 ( 4 kB)
fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
vmalloc : 0xe0800000 - 0xff800000 ( 496 MB)
lowmem : 0xc0000000 - 0xe0000000 ( 512 MB)
pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
.text : 0xc0008000 - 0xc04889d8 (4611 kB)
.init : 0xc05e7000 - 0xc062e000 ( 284 kB)
.data : 0xc062e000 - 0xc065bb40 ( 183 kB)
.bss : 0xc065bb40 - 0xc06a9440 ( 311 kB)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[ 0.000000] NR_IRQS:16 nr_irqs:16 16
[ 0.000000] mvebu_mbus: [Firmware Warn]: deprecated mbus-mvebu Device Tree, suspend/resume will not work
[ 0.000000] L2C-310 enabling early BRESP for Cortex-A9
[ 0.000000] L2C-310 full line of zeros enabled for Cortex-A9
[ 0.000000] L2C-310 D prefetch enabled, offset 1 lines
[ 0.000000] L2C-310 dynamic clock gating enabled, standby mode enabled
[ 0.000000] L2C-310 Coherent cache controller enabled, 16 ways, 1024 kB
[ 0.000000] L2C-310 Coherent: CACHE_ID 0x410054c9, AUX_CTRL 0x56070001
[ 0.000000] Selected CPU frequency (16) unsupported
[ 0.000000] Switching to timer-based delay loop, resolution 40ns
[ 0.000003] sched_clock: 32 bits at 25MHz, resolution 40ns, wraps every 85899345900ns
[ 0.000009] clocksource: armada_370_xp_clocksource: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 76450417870 ns
[ 0.000116] Calibrating local timer... 933.11MHz.
[ 0.060027] Calibrating delay loop (skipped), value calculated using timer frequency.. 50.00 BogoMIPS (lpj=250000)
[ 0.060032] pid_max: default: 32768 minimum: 301
[ 0.060071] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.060075] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.060274] CPU: Testing write buffer coherency: ok
[ 0.060363] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.060374] Setting up static identity map for 0x8280 - 0x82d8
[ 0.060432] mvebu-soc-id: MVEBU SoC ID=0x6820, Rev=0x4
[ 0.060492] mvebu-pmsu: Initializing Power Management Service Unit
[ 0.060889] Booting CPU 1
[ 0.061025] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[ 0.061055] Brought up 2 CPUs
[ 0.061060] SMP: Total of 2 processors activated (100.00 BogoMIPS).
[ 0.061063] CPU: All CPU(s) started in SVC mode.
[ 0.062729] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
[ 0.062775] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.062781] futex hash table entries: 512 (order: 3, 32768 bytes)
[ 0.062818] pinctrl core: initialized pinctrl subsystem
[ 0.063123] NET: Registered protocol family 16
[ 0.063555] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.090046] cpuidle: using governor ladder
[ 0.090175] mvebu-pmsu: CPU hotplug support is currently broken on Armada 38x: disabling
[ 0.090182] mvebu-pmsu: CPU idle is currently broken on Armada 38x: disabling
[ 0.120441] reg-fixed-voltage xhci0-vbus: could not find pctldev for node /soc/internal-regs/pinctrl@18000/xhci0-vbus-pins, deferring probe
[ 0.120576] SCSI subsystem initialized
[ 0.120656] libata version 3.00 loaded.
[ 0.120759] usbcore: registered new interface driver usbfs
[ 0.120785] usbcore: registered new interface driver hub
[ 0.120805] usbcore: registered new device driver usb
[ 0.121294] clocksource: Switched to clocksource armada_370_xp_clocksource
[ 0.121609] NET: Registered protocol family 2
[ 0.121827] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.121848] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.121878] TCP: Hash tables configured (established 4096 bind 4096)
[ 0.121899] UDP hash table entries: 256 (order: 1, 8192 bytes)
[ 0.121911] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[ 0.121970] NET: Registered protocol family 1
[ 0.121982] PCI: CLS 0 bytes, default 64
[ 0.122784] Crashlog allocated RAM at address 0x3f00000
[ 0.122861] workingset: timestamp_bits=30 max_order=17 bucket_order=0
[ 0.124948] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.124953] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[ 0.125684] io scheduler noop registered
[ 0.125689] io scheduler deadline registered (default)
[ 0.126040] armada-38x-pinctrl f1018000.pinctrl: registered pinctrl driver
[ 0.126633] mvebu-pcie soc:pcie-controller: PCI host bridge to bus 0000:00
[ 0.126640] pci_bus 0000:00: root bus resource [io 0x1000-0xfffff]
[ 0.126645] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xe7ffffff]
[ 0.126649] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.126663] pci 0000:00:01.0: [11ab:6820] type 01 class 0x060400
[ 0.126747] pci 0000:00:02.0: [11ab:6820] type 01 class 0x060400
[ 0.126829] PCI: bus0: Fast back to back transfers disabled
[ 0.126834] pci 0000:00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[ 0.126840] pci 0000:00:02.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[ 0.126890] pci 0000:01:00.0: [11ab:2b40] type 00 class 0x020000
[ 0.126906] pci 0000:01:00.0: reg 0x10: [mem 0x40000000-0x401fffff 64bit pref]
[ 0.126915] pci 0000:01:00.0: reg 0x18: [mem 0x40200000-0x402fffff 64bit pref]
[ 0.126974] pci 0000:01:00.0: supports D1 D2
[ 0.126977] pci 0000:01:00.0: PME# supported from D0 D1 D3hot D3cold
[ 0.127039] PCI: bus1: Fast back to back transfers disabled
[ 0.127045] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
[ 0.127097] pci 0000:02:00.0: [11ab:2b40] type 00 class 0x020000
[ 0.127116] pci 0000:02:00.0: reg 0x10: [mem 0x42000000-0x421fffff 64bit pref]
[ 0.127127] pci 0000:02:00.0: reg 0x18: [mem 0x42200000-0x422fffff 64bit pref]
[ 0.127208] pci 0000:02:00.0: supports D1 D2
[ 0.127211] pci 0000:02:00.0: PME# supported from D0 D1 D3hot D3cold
[ 0.127273] PCI: bus2: Fast back to back transfers disabled
[ 0.127278] pci_bus 0000:02: busn_res: [bus 02-ff] end is updated to 02
[ 0.127347] pci 0000:00:01.0: BAR 8: assigned [mem 0xe0000000-0xe02fffff]
[ 0.127353] pci 0000:00:02.0: BAR 8: assigned [mem 0xe0400000-0xe06fffff]
[ 0.127360] pci 0000:01:00.0: BAR 0: assigned [mem 0xe0000000-0xe01fffff 64bit pref]
[ 0.127369] pci 0000:01:00.0: BAR 2: assigned [mem 0xe0200000-0xe02fffff 64bit pref]
[ 0.127377] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.127383] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xe02fffff]
[ 0.127389] pci 0000:02:00.0: BAR 0: assigned [mem 0xe0400000-0xe05fffff 64bit pref]
[ 0.127399] pci 0000:02:00.0: BAR 2: assigned [mem 0xe0600000-0xe06fffff 64bit pref]
[ 0.127408] pci 0000:00:02.0: PCI bridge to [bus 02]
[ 0.127412] pci 0000:00:02.0: bridge window [mem 0xe0400000-0xe06fffff]
[ 0.127614] mv_xor f1060800.xor: Marvell shared XOR driver
[ 0.181705] mv_xor f1060800.xor: Marvell XOR (Descriptor Mode): ( xor cpy intr )
[ 0.181790] mv_xor f1060900.xor: Marvell shared XOR driver
[ 0.241683] mv_xor f1060900.xor: Marvell XOR (Descriptor Mode): ( xor cpy intr )
[ 0.241820] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
[ 0.242583] console [ttyS0] disabled
[ 0.262647] f1012000.serial: ttyS0 at MMIO 0xf1012000 (irq = 21, base_baud = 12500000) is a 16550A
[ 0.983684] console [ttyS0] enabled
[ 0.989079] loop: module loaded
[ 0.992506] ahci-mvebu f10a8000.sata: AHCI 0001.0000 32 slots 2 ports 6 Gbps 0x3 impl platform mode
[ 1.001601] ahci-mvebu f10a8000.sata: flags: 64bit ncq sntf led only pmp fbs pio slum part sxs
[ 1.010690] scsi host0: ahci-mvebu
[ 1.014255] scsi host1: ahci-mvebu
[ 1.017753] ata1: SATA max UDMA/133 mmio [mem 0xf10a8000-0xf10a9fff] port 0x100 irq 41
[ 1.025711] ata2: SATA max UDMA/133 mmio [mem 0xf10a8000-0xf10a9fff] port 0x180 irq 41
[ 1.033997] pxa3xx-nand f10d0000.flash: This platform can't do DMA on this device
[ 1.041762] nand: device found, Manufacturer ID: 0x01, Chip ID: 0xda
[ 1.048140] nand: AMD/Spansion S34ML02G2
[ 1.052084] nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 128
[ 1.059774] pxa3xx-nand f10d0000.flash: ECC strength 16, ECC step size 2048
[ 1.066951] Bad block table found at page 131008, version 0x01
[ 1.073145] Bad block table found at page 130944, version 0x01
[ 1.079252] 11 ofpart partitions found on MTD device pxa3xx_nand-0
[ 1.085462] Creating 11 MTD partitions on "pxa3xx_nand-0":
[ 1.090969] 0x000000000000-0x000000200000 : "u-boot"
[ 1.096225] 0x000000200000-0x000000220000 : "u_env"
[ 1.101365] 0x000000220000-0x000000260000 : "s_env"
[ 1.106490] 0x0000007e0000-0x000000820000 : "devinfo"
[ 1.111805] 0x000000820000-0x000000a00000 : "sysdiag"
[ 1.117111] 0x000000a00000-0x000005a00000 : "kernel1"
[ 1.122615] 0x000001000000-0x000005a00000 : "ubi"
[ 1.127720] 0x000005a00000-0x00000aa00000 : "kernel2"
[ 1.133200] 0x000006000000-0x00000aa00000 : "rootfs2"
[ 1.138655] 0x00000aa00000-0x000010000000 : "syscfg"
[ 1.144060] 0x000000260000-0x000000820000 : "unused_area"
[ 1.149974] libphy: Fixed MDIO Bus: probed
[ 1.154328] libphy: orion_mdio_bus: probed
[ 1.158559] mvneta_bm f10c8000.bm: Buffer Manager for network controller enabled
[ 1.167228] mvneta f1070000.ethernet eth0: Using hardware mac address 60:38:e0:c3:86:90
[ 1.176237] mvneta f1034000.ethernet eth1: Using random mac address d6:0b:81:27:b9:b6
[ 1.184155] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.190708] ehci-pci: EHCI PCI platform driver
[ 1.195200] ehci-platform: EHCI generic platform driver
[ 1.200515] ehci-orion: EHCI orion driver
[ 1.204603] orion-ehci f1058000.usb: EHCI Host Controller
[ 1.210033] orion-ehci f1058000.usb: new USB bus registered, assigned bus number 1
[ 1.217678] orion-ehci f1058000.usb: irq 37, io mem 0xf1058000
[ 1.251291] orion-ehci f1058000.usb: USB 2.0 started, EHCI 1.00
[ 1.257440] hub 1-0:1.0: USB hub found
[ 1.261213] hub 1-0:1.0: 1 port detected
[ 1.265503] usbcore: registered new interface driver usb-storage
[ 1.271662] armada38x-rtc f10a3800.rtc: rtc core: registered f10a3800.rtc as rtc0
[ 1.279276] i2c /dev entries driver
[ 1.294182] orion_wdt: Initial timeout 171 sec
[ 1.298860] sdhci: Secure Digital Host Controller Interface driver
[ 1.305072] sdhci: Copyright(c) Pierre Ossman
[ 1.362496] ata1: SATA link down (SStatus 0 SControl 300)
[ 1.367943] ata2: SATA link down (SStatus 0 SControl 300)
[ 1.371311] mmc0: SDHCI controller on f10d8000.sdhci [f10d8000.sdhci] using ADMA
[ 1.371385] sdhci-pltfm: SDHCI platform and OF driver helper
[ 1.377120] marvell-cesa f1090000.crypto: CESA device successfully registered
[ 1.377517] NET: Registered protocol family 10
[ 1.391552] NET: Registered protocol family 17
[ 1.391566] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[ 1.391568] 8021q: 802.1Q VLAN Support v1.8
[ 1.391623] Registering SWP/SWPB emulation handler
[ 1.392807] xhci-hcd f10f8000.usb3: xHCI Host Controller
[ 1.392818] xhci-hcd f10f8000.usb3: new USB bus registered, assigned bus number 2
[ 1.392876] xhci-hcd f10f8000.usb3: hcc params 0x0a000990 hci version 0x100 quirks 0x00010010
[ 1.392894] xhci-hcd f10f8000.usb3: irq 44, io mem 0xf10f8000
[ 1.393145] hub 2-0:1.0: USB hub found
[ 1.393171] hub 2-0:1.0: 1 port detected
[ 1.393258] xhci-hcd f10f8000.usb3: xHCI Host Controller
[ 1.393267] xhci-hcd f10f8000.usb3: new USB bus registered, assigned bus number 3
[ 1.393302] usb usb3: We don't know the algorithms for LPM for this host, disabling LPM.
[ 1.393481] hub 3-0:1.0: USB hub found
[ 1.393504] hub 3-0:1.0: 1 port detected
[ 1.393820] UBI: auto-attach mtd6
[ 1.393823] ubi0: attaching mtd6
[ 1.397888] random: fast init done
[ 1.401583] mmc0: new high speed SDIO card at address 0001
[ 1.592651] ubi0: scanning is finished
[ 1.600840] ubi0: attached mtd6 (name "ubi", size 74 MiB)
[ 1.606272] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[ 1.613179] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[ 1.619993] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
[ 1.626986] ubi0: good PEBs: 592, bad PEBs: 0, corrupted PEBs: 0
[ 1.633019] ubi0: user volume: 2, internal volumes: 1, max. volumes count: 128
[ 1.640270] ubi0: max/mean erase counter: 2/0, WL threshold: 4096, image sequence number: 948808128
[ 1.649356] ubi0: available PEBs: 0, total reserved PEBs: 592, PEBs reserved for bad PEB handling: 40
[ 1.658620] ubi0: background thread "ubi_bgt0d" started, PID 669
[ 1.659055] block ubiblock0_0: created from ubi0:0(rootfs)
[ 1.659057] ubiblock: device ubiblock0_0 (rootfs) set to be root filesystem
[ 1.659237] mvsw61xx 10.mvsw61xx: Found MV88E6352 at f1072004.mdio-mii:10
[ 1.659240] mvsw61xx 10.mvsw61xx: Using direct addressing
[ 1.670167] armada38x-rtc f10a3800.rtc: setting system clock to 1970-01-01 00:03:39 UTC (219)
[ 1.698011] Waiting 1 sec before mounting root device...
[ 2.723022] VFS: Mounted root (squashfs filesystem) readonly on device 254:0.
[ 2.730308] Freeing unused kernel memory: 284K
[ 2.734785] This architecture does not have kernel memory protection.
[ 2.896785] init: Console is alive
[ 2.900265] init: - watchdog -
[ 3.262920] kmodloader: loading kernel modules from /etc/modules-boot.d/*
[ 3.289000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 3.295478] ohci-platform: OHCI generic platform driver
[ 3.301142] uhci_hcd: USB Universal Host Controller Interface driver
[ 3.307803] ohci-pci: OHCI PCI platform driver
[ 3.312398] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
[ 3.323770] init: - preinit -
[ 3.447263] mvneta f1070000.ethernet tmp0: renamed from eth0
[ 3.492536] mvneta f1034000.ethernet eth0: renamed from eth1
[ 3.552459] mvneta f1070000.ethernet eth1: renamed from tmp0
[ 3.931275] mvneta f1034000.ethernet eth0: configuring for fixed link mode
[ 3.938576] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 3.944591] mvneta f1034000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off
[ 3.952497] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 8.034598] mount_root: loading kmods from internal overlay
[ 8.047265] kmodloader: loading kernel modules from //etc/modules-boot.d/*
[ 8.056976] kmodloader: done loading kernel modules from //etc/modules-boot.d/*
[ 8.453110] UBIFS (ubi0:1): background thread "ubifs_bgt0_1" started, PID 789
[ 8.481435] UBIFS (ubi0:1): recovery needed
[ 8.528056] UBIFS (ubi0:1): recovery completed
[ 8.532556] UBIFS (ubi0:1): UBIFS: mounted UBI device 0, volume 1, name "rootfs_data"
[ 8.540418] UBIFS (ubi0:1): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[ 8.550378] UBIFS (ubi0:1): FS size: 59424768 bytes (56 MiB, 468 LEBs), journal size 2920448 bytes (2 MiB, 23 LEBs)
[ 8.560858] UBIFS (ubi0:1): reserved for root: 2806778 bytes (2740 KiB)
[ 8.567503] UBIFS (ubi0:1): media format: w4/r0 (latest is w4/r0), UUID CC048BDA-7D41-4565-B909-0CF7C42079D6, small LPT model
[ 8.579596] block: attempting to load /tmp/ubifs_cfg/upper/etc/config/fstab
[ 8.589411] block: extroot: not configured
[ 8.641331] UBIFS (ubi0:1): un-mount UBI device 0
[ 8.646059] UBIFS (ubi0:1): background thread "ubifs_bgt0_1" stops
[ 8.653965] UBIFS (ubi0:1): background thread "ubifs_bgt0_1" started, PID 792
[ 8.666167] random: crng init done
[ 8.716965] UBIFS (ubi0:1): UBIFS: mounted UBI device 0, volume 1, name "rootfs_data"
[ 8.724835] UBIFS (ubi0:1): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[ 8.734795] UBIFS (ubi0:1): FS size: 59424768 bytes (56 MiB, 468 LEBs), journal size 2920448 bytes (2 MiB, 23 LEBs)
[ 8.745275] UBIFS (ubi0:1): reserved for root: 2806778 bytes (2740 KiB)
[ 8.751920] UBIFS (ubi0:1): media format: w4/r0 (latest is w4/r0), UUID CC048BDA-7D41-4565-B909-0CF7C42079D6, small LPT model
[ 9.152628] block: attempting to load /tmp/ubifs_cfg/upper/etc/config/fstab
[ 9.162115] block: extroot: not configured
[ 9.212136] mount_root: switching to ubifs overlay
[ 9.246233] ubi1: attaching mtd9
[ 9.478132] ubi1: scanning is finished
[ 9.486355] ubi1: attached mtd9 (name "syscfg", size 86 MiB)
[ 9.492045] ubi1: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[ 9.498948] ubi1: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[ 9.505765] ubi1: VID header offset: 2048 (aligned 2048), data offset: 4096
[ 9.512757] ubi1: good PEBs: 680, bad PEBs: 8, corrupted PEBs: 0
[ 9.518786] ubi1: user volume: 1, internal volumes: 1, max. volumes count: 128
[ 9.526040] ubi1: max/mean erase counter: 9/6, WL threshold: 4096, image sequence number: 1795032400
[ 9.535211] ubi1: available PEBs: 0, total reserved PEBs: 680, PEBs reserved for bad PEB handling: 32
[ 9.544474] ubi1: background thread "ubi_bgt1d" started, PID 802
[ 9.555135] UBIFS (ubi1:0): background thread "ubifs_bgt1_0" started, PID 809
[ 9.607855] UBIFS (ubi1:0): UBIFS: mounted UBI device 1, volume 0, name "syscfg"
[ 9.615291] UBIFS (ubi1:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[ 9.625252] UBIFS (ubi1:0): FS size: 80375808 bytes (76 MiB, 633 LEBs), journal size 4063232 bytes (3 MiB, 32 LEBs)
[ 9.635732] UBIFS (ubi1:0): reserved for root: 3796347 bytes (3707 KiB)
[ 9.642376] UBIFS (ubi1:0): media format: w4/r0 (latest is w4/r0), UUID C1D8E9E4-D387-4970-A506-643B03357E5B, small LPT model
[ 9.655198] urandom-seed: Seeding with /etc/urandom.seed
[ 9.733942] procd: - early -
[ 9.736853] procd: - watchdog -
[ 10.328656] procd: - watchdog -
[ 10.331889] procd: - ubus -
[ 10.386117] procd: - init -
[ 10.526853] kmodloader: loading kernel modules from /etc/modules.d/*
[ 10.537930] ntfs: driver 2.1.32 [Flags: R/O MODULE].
[ 10.544545] tun: Universal TUN/TAP device driver, 1.6
[ 10.549619] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 10.556869] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[ 10.564965] Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011)
[ 10.573545] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 10.580542] Netfilter messages via NETLINK v0.30.
[ 10.585846] ip_set: protocol 6
[ 10.594261] cryptodev: driver 1.9 loaded.
[ 10.598650] Loading modules backported from Linux version wt-2017-11-01-0-gfe248fc2c180
[ 10.606698] Backport generated by backports.git v4.14-rc2-1-31-g86cf0e5d
[ 10.621251] <<Marvell Mac80211 Wireless PCIE Network Driver version 10.3.4.0-20180118>>
[ 10.629315] pci 0000:00:01.0: enabling device (0140 -> 0142)
[ 10.635114] ieee80211 phy0: priv->pcmd_buf = ddedc000 priv->pphys_cmd_buf = 1dedc000
[ 10.689833] ieee80211 phy0: fw download start
[ 10.689839] ieee80211 phy0: ddr init: download start
[ 10.690217] ieee80211 phy0: ddr init: download complete
[ 10.827658] ieee80211 phy0: FwSize = 449468 downloaded Size = 449468 curr_iteration 65522
[ 13.697295] ieee80211 phy0: fw download complete
[ 13.697331] ieee80211 phy0: device node: /soc/pcie-controller/pcie@1,0
[ 13.713681] ieee80211 phy0: pcmd = ddedc000
[ 13.731321] ieee80211 phy0: firmware version: 0x9030204
[ 14.038294] ieee80211 phy0: firmware region code: 30
[ 14.068932] ieee80211 phy0: 2G disabled, 5G enabled
[ 14.073851] ieee80211 phy0: 4 TX antennas, 4 RX antennas
[ 14.079239] pci 0000:00:02.0: enabling device (0140 -> 0142)
[ 14.085024] ieee80211 phy1: priv->pcmd_buf = d9a54000 priv->pphys_cmd_buf = 19a54000
[ 14.091335] ieee80211 phy1: fw download start
[ 14.091340] ieee80211 phy1: ddr init: download start
[ 14.091721] ieee80211 phy1: ddr init: download complete
[ 14.232140] ieee80211 phy1: FwSize = 449468 downloaded Size = 449468 curr_iteration 65527
[ 15.427296] ieee80211 phy1: fw download complete
[ 15.427330] ieee80211 phy1: device node: /soc/pcie-controller/pcie@2,0
[ 15.443677] ieee80211 phy1: pcmd = d9a54000
[ 15.460310] ieee80211 phy1: firmware version: 0x9030204
[ 15.769307] ieee80211 phy1: firmware region code: 30
[ 15.791959] ieee80211 phy1: 2G enabled, 5G disabled
[ 15.796858] ieee80211 phy1: 4 TX antennas, 4 RX antennas
[ 15.804671] hidraw: raw HID events driver (C) Jiri Kosina
[ 15.812413] u32 classifier
[ 15.815132] input device check on
[ 15.818806] Actions configured
[ 15.822668] Mirror/redirect action on
[ 15.828203] nf_conntrack version 0.5.0 (8192 buckets, 32768 max)
[ 15.840156] fuse init (API version 7.26)
[ 15.847467] Bluetooth: Core ver 2.22
[ 15.851089] NET: Registered protocol family 31
[ 15.855569] Bluetooth: HCI device and connection manager initialized
[ 15.861956] Bluetooth: HCI socket layer initialized
[ 15.866854] Bluetooth: L2CAP socket layer initialized
[ 15.871937] Bluetooth: SCO socket layer initialized
[ 15.877272] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 15.882629] Bluetooth: BNEP filters: protocol multicast
[ 15.887877] Bluetooth: BNEP socket layer initialized
[ 15.894067] Bluetooth: vendor=0x2df, device=0x9136, class=255, fn=2
[ 16.724821] Bluetooth: FW download over, size 695532 bytes
[ 17.321320] sdio platform data not available
[ 17.326290] usbcore: registered new interface driver btusb
[ 17.332475] Bluetooth: HCI UART driver ver 2.3
[ 17.336942] Bluetooth: HCI UART protocol H4 registered
[ 17.342112] Bluetooth: HCI UART protocol BCSP registered
[ 17.347447] Bluetooth: HCI UART protocol ATH3K registered
[ 17.353351] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[ 17.359302] Bluetooth: HIDP socket layer initialized
[ 17.364923] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 17.390894] Bluetooth: RFCOMM TTY layer initialized
[ 17.395824] Bluetooth: RFCOMM socket layer initialized
[ 17.400989] Bluetooth: RFCOMM ver 1.11
[ 17.405820] usbcore: registered new interface driver ums-alauda
[ 17.412006] usbcore: registered new interface driver ums-cypress
[ 17.418276] usbcore: registered new interface driver ums-datafab
[ 17.424758] usbcore: registered new interface driver ums-freecom
[ 17.431041] usbcore: registered new interface driver ums-isd200
[ 17.437255] usbcore: registered new interface driver ums-jumpshot
[ 17.443616] usbcore: registered new interface driver ums-karma
[ 17.449737] usbcore: registered new interface driver ums-sddr09
[ 17.455939] usbcore: registered new interface driver ums-sddr55
[ 17.462146] usbcore: registered new interface driver ums-usbat
[ 17.475570] xt_time: kernel timezone is -0000
[ 17.483085] PPP generic driver version 2.4.2
[ 17.487792] NET: Registered protocol family 24
[ 17.493122] kmodloader: done loading kernel modules from /etc/modules.d/*
[ 18.686602] mvneta f1034000.ethernet eth0: configuring for fixed link mode
[ 18.693634] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 18.699523] mvneta f1034000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off
[ 18.707901] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 18.715864] br-lan: port 1(eth0.1) entered blocking state
[ 18.721310] br-lan: port 1(eth0.1) entered disabled state
[ 18.726898] device eth0.1 entered promiscuous mode
[ 18.731729] device eth0 entered promiscuous mode
[ 18.737485] br-lan: port 1(eth0.1) entered blocking state
[ 18.742917] br-lan: port 1(eth0.1) entered forwarding state
[ 18.748550] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready
[ 18.760732] mvneta f1070000.ethernet eth1: configuring for fixed link mode
[ 18.768090] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 18.774027] mvneta f1070000.ethernet eth1: Link is Up - 1Gbps/Full - flow control off
[ 18.782297] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[ 19.761562] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
[ 189.919585] pppoe-wan: renamed from ppp0
Awwww. I want my 3rd radio working? Its fine under latest DD-WRT??? help!