OpenWrt Forum Archive

Topic: How to revert from openwrt to stock WA901NDv4

The content of this topic has been archived on 16 Apr 2018. There are no obvious gaps in this topic, but there may still be some posts missing at the end.

It wont accapt stock when i load into upgrade firmver how to do these? How to revert from openwrt to stock WA901v4 ap rputer

1. download stripped down bin version (with uboot cut off) from fried zombie (http://www.friedzombie.com/tplink-stripped-firmware/)
2. firmware update as usual
3. now you have original firmware, which you can reflash with newest from tpl website

edit: shucks, he does not have v4 there :-( I quess you will have to strip uboot yourself, but to do that you will have to find uboot size or pm/email friedzombie, he's a nice guy, he'll help you.

(Last edited by nozombian on 7 Jan 2018, 18:39)

shucks do not have v4

is there webrevert for version four tplink wireless access point 901

still same router reboot and power on in lede

The discussion might have continued from here.