1 - i start default firmware ( LEDE )

2 - i change br-lan IP to 192.168.1.25 -> ifconfig br-lan 192.168.1.25

3 - i open web page in 192.168.1.25 -> ok

4 - i look in web page for lan and i have always the default IP 192.168.1.1   

5 - I look in minidlna page and IP is also default iP 192.168.1.1

6 - for lan i use luci for 192.168.1.25 , i save

6 - I look in minidlna page and IP is also default iP 192.168.1.1

Question : Why this ?

With my WNR3500 and Tomato firmware the IP configuration is automaticly good

(Last edited by F5BJR on 11 Dec 2017, 06:50)

Use the "save and apply" button at the bottom of the page you made changes on.  If you only click "save" the change does not take effect until the next reboot.

Yes for LAN IP 192.168.1.25 but after save & apply & reboot :

I look in minidlna page and IP is always default iP 192.168.1.1

Question : Why this ?

With my WNR3500 and very old Tomato firmware the minidlna IP configuration is automaticly good

Remark : I use not the LEDE firmware with the WNR3500 but with a Kimax BS-U25 box

I think that Luci is not also powerfull as tomato by exemple i have minidlna conflicts with 3 * OpenWrt box's

Exist another alternative for WebUI sofftware ?

(Last edited by F5BJR on 11 Dec 2017, 18:13)