1 (edited by benbibi 2017-07-18 09:00:02)

Topic: Installing Openwrt on RouterBOard RB912UAG-2HPnD

Hello everybody, I come here to ask a question because I have trouble to install openwrt on my router. I followed the different steps on different topics but when I try to connect into the ramfs via ssh or telnet I simply cannot and I don't understand why.

I post here what I got on my "tftp/bootp server" :

dnsmasq-dhcp: 369411419 available DHCP range: 192.168.88.100 -- 192.168.88.200
dnsmasq-dhcp: 369411419 vendor class: Mips_boot
dnsmasq-dhcp: 369411419 options: bootp, enp3s0
dnsmasq-dhcp: 369411419 BOOTP(enp3s0) 192.168.88.182 6c:3b:6b:8c:2a:5a
dnsmasq-dhcp: 369411419 nom de fichier 'bootfile' : openwrt-ar71xx-nand-vmlinux-initramfs.elf
dnsmasq-dhcp: 369411419 serveur suivant : 192.168.88.22
dnsmasq-dhcp: 369411419 sent size: 4 option: 1 netmask 255.255.255.0
dnsmasq-dhcp: 369411419 sent size: 4 option: 28 broadcast 192.168.88.255
dnsmasq-dhcp: 369411419 sent size: 4 option: 3 router 192.168.88.22
dnsmasq-tftp: sent /home/ben/Tlchargements/openwrt-ar71xx-nand-vmlinux-initramfs.elf to 192.168.88.182

And what I got when I try to connect via ssh :

ssh: connect to host 192.168.88.1 port 22: No route to host


Feel free to ask me questions or to show me another topic I missed which explains how to resolve my problem.

Re: Installing Openwrt on RouterBOard RB912UAG-2HPnD

Hi again,

after some test,I was wondering if the bootfile (openwrt-ar71xx-nand-vmlinux-initramfs.elf) that I send to the routerboard may be not valid. I tought this because there is a problem after rebooting, I can't even see my routerboard after doing a networks scan.