Hi all
I am trying to install openwrt in the linksys 1200ac router. It has two dual partition. When I flash it from one partition it boot from other partition. so I used
Firmware Recovery:
Manually switch the router from primary to alternate partition or vice versa [backup] partition:
Power off router with power switch.
Turn power back on and Power LED will light.
As soon as all LEDs turn off (~2s), power off router with power switch
Turn power back on and Power LED will light.
As soon as all LEDs turn off (~2s), power off router with power switch
Turn power back on and Power LED will light.
As soon as all LEDs turn off (~2s), power off router with power switch
Turn power back on and allow router to fully boot.
It should now be booted to the alternate firmware partition (partitions)
So I used this way to switch the boot from previously flashed partition. It successfully switch boot but Openwrt does not install. Does anyone have any process or tips? Or am I doing any wrong thing?