The content of this topic has been archived on 1 May 2018. There are no obvious gaps in this topic, but there may still be some posts missing at the end.
Hi,
I'd like to know why this router isn't supported for openwrt yet as it has almost identical hardware as the archer C7 and looks one of the best low budget routers in market today...
Any plans to release a version for it? I have one and I'm very anxious to use openwrt in it. Thanks
Supported in lede: http://downloads.lede-project.org/snaps … x/generic/
Hi, how to flash lede-firmware from original? I get an error from web-gui.
which error? maybe you can flash from tftp
hi, I have try Archer C59
Hardware Version: 1.0
Stock Firmware Version: 1.0.0 Build 20160512 rel.59991
with
LEDE Snapshot: r4433-680a5c5 (20.06.2017)
There was no problem to flash it via GUI from this HW/stock TP-Link firmware version.
But as described in
github.com/pepe2k/lede-project-source/c … 4b827fed0f
Currently not working:
- Port LAN1 on C59
- WiFi 5GHz (missing ath10k firmware for QCA9886 chip)
In my case also not work WAN port, so I have put WAN on LAN port 4 to test these device.
I try a other device to confirm that WAN (eth0) is dead.
I have also try to put firmware found at github.com/kvalo/ath10k-firmware. Without success, firmware crashed. But I not sure how test it correctly.
See https://bugs.lede-project.org/index.php … ask_id=864 for a manual fix, that should be resolved formally soon.
See bugs.lede-project.org/index.php?do=deta … ask_id=864 for a manual fix
tnx slh, I found it just in same moment. I can confirm it work so far that I can see the device. I not test stability and performance.
The discussion might have continued from here.