201 (edited by adrianiordan3 2015-01-27 22:19:04)

Re: Zyxel P-2812HNU-F3-telenor debrand ?

Unde trebuie sa bifez active ca nu gasesc

202 (edited by passero 2015-08-08 13:57:32)

Re: Zyxel P-2812HNU-F3-telenor debrand ?

cianyika wrote:
passero wrote:

Thank you very much for the info but, unfortunately, I bricked my device :-(

@Pasero easy way to unbrick your device its this :
short r15 and r24 take and CFG 04 UART write bl using teraterm.

https://www.dropbox.com/sh/9aup68dv6oq5 … t.asc?dl=0

@cianyika
thank you very much for the tip....I, finally, found some time to spend on my router and as soon as possible I'll try!!

Update: DONE!!!!!! Thanks

Re: Zyxel P-2812HNU-F3-telenor debrand ?

Hello! Can anyone provide me a metod to install original firmware from ZyXEL on a branded P 2812HNU F3 Telenor?
Ma poate ajuta cineva cu fisierele pentru a instala firmware-ul original pe un router branduit telenor? Linkurile prezentate anterior nu mai sunt valabile.
Care este procedura? Se face upgrade la versiunea de firmware upload-ata aici sau...? Multumesc anticipat pentru raspuns!

Re: Zyxel P-2812HNU-F3-telenor debrand ?

cornelus2009 wrote:

Succeded to unpack and repack the firmware.
With this ocasion, i enabled by default folowing users.

root  ----------------------------> passwd ----> 1234
supervisor --------------------> passwd ----> zyad1234
TelenorRemoteAdmin ----> passwd ----> 1234
admin --------------------------> passwd ----> wpakey from the bottom of device

do upgrade firmware, and very important for those to work, do a reset to default.

This is the firmware bassed on 311BLN14 from telenor

https://www.dropbox.com/s/btpdmbq6bv4ej … 1.bin?dl=0

Ai putea sa reuploadezi fisierul? Can you reupload the file again? Thanks!

Re: Zyxel P-2812HNU-F3-telenor debrand ?

https://www.dropbox.com/s/bk7qohggm6jsw … 1.bin?dl=0

Burlacu Cornel
Romania

206 (edited by DeuxEx 2015-10-05 12:01:49)

Re: Zyxel P-2812HNU-F3-telenor debrand ?

Multumesc! Am instalat acest firmware, se conecteaza la ONT, dar nu pot sa ma loghez pe nicio pagina web cu exceptia celei home (google.com). Imi apare o pagina intr-o limba scandinava si imi cere sa instalez/rulez o aplicatie in aceiasi limba. Atasez mai jos 3 printscreen-uri:

http://i58.tinypic.com/xdin2f.jpg

http://i59.tinypic.com/iqvd40.jpg

http://i58.tinypic.com/30w9ikx.jpg

Ma poti ajuta cu ceva informatii?

Re: Zyxel P-2812HNU-F3-telenor debrand ?

nu mai stiu exact pasii, dar in ultima imagine, unde scrie wandevicetype schimbi in pppoe sau nu mai stiu cum, apoi iti apare sa bagi user si parola parola de la rds.

Burlacu Cornel
Romania

208 (edited by DeuxEx 2015-10-05 18:09:10)

Re: Zyxel P-2812HNU-F3-telenor debrand ?

Multumesc pentru info, dar momentan as vrea sa-l conectez la un ONT (router pe fibra optica) de la RDS, adica as vrea sa stiu pasii pentru conectarea la un alt router. Nu vreau sa-l conectez direct la RDS. Ca sa nu imi mai apara instalarea aplicatiei din prima imagine, ce trebuie sa fac? Multumesc mult pentru ajutor...

PS: se poate instala firmware-ul original de la ZyXEL in locul celui branduit?

Re: Zyxel P-2812HNU-F3-telenor debrand ?

Salut Cornelus !Am si eu routerul Zyxel P-2812HNU-F3 .Am luat firmwareul pe care l-ai pus tu  insa nu stiu cum sa il instalez. Imi apare doar prima pagina a routerului http://10.0.0.138/customer/userGuide.html dau pe link-ul din josul paginii insa imi apare http://10.0.0.138/SIK_off.cgi si doar atat....o pagina alba ,adica nu se incarca nimic.
Cum fac sa pot instala acel firmware?

Re: Zyxel P-2812HNU-F3-telenor debrand ?

Am scris doar http://10.0.0.138 si imi intra in interfata user si parola (am resetat routerul inainte) Insa userul nu este admin si nici parola 1234 sau admin admin. Ce fac mai departe?

Re: Zyxel P-2812HNU-F3-telenor debrand ?

Am reusit sa il fac sa mearga.....multumesc in special lui Costelus pentru indicatii si pentru firmware!

212 (edited by binaryx 2015-10-27 17:41:41)

Re: Zyxel P-2812HNU-F3-telenor debrand ?

Have anybody Telenor branded firmware for P-2812HNU-F1 vT - V3.10(TUL.4)?

Re: Zyxel P-2812HNU-F3-telenor debrand ?

What is the procedure to reflash the original firmware (e.g. https://www.dropbox.com/s/bk7qohggm6jsw … .bin?dl=0) over the OpenWRT? I tried through LuCI but it doesn't accept the image… I have F3 version from Telenor

Re: Zyxel P-2812HNU-F3-telenor debrand ?

NAND is not Identify. Wiped the loader router worked on the locked operator, help restore

img.radiokot.ru/files/115698/1akuy79k0v.jpg

215 (edited by scapi 2017-06-07 15:32:46)

Re: Zyxel P-2812HNU-F3-telenor debrand ?

Strange, Upload PCB photos somewhere.

Re: Zyxel P-2812HNU-F3-telenor debrand ?

img.radiokot.ru/files/115698/1akx3nlozb.jpg

img.radiokot.ru/files/115698/1akx3okgki.JPG

img.radiokot.ru/files/115698/1akx3q4ap1.JPG

217 (edited by scapi 2017-06-07 16:04:36)

Re: Zyxel P-2812HNU-F3-telenor debrand ?

It stays like that also in normal mode ? (not UART )
What CFG ar You getting at boot ?

218 (edited by vadynik 2017-06-08 09:09:09)

Re: Zyxel P-2812HNU-F3-telenor debrand ?

Line of type CFG-105, I do not remember exactly, in the cycle, because of the bootloader apparently

That's how it behaves in a non-UART mode, a cyclic restart

img.radiokot.ru/files/115698/1alpjpo74o.jpg

219 (edited by vadynik 2017-06-19 17:21:53)

Re: Zyxel P-2812HNU-F3-telenor debrand ?

Did not remove the jumpers from the resistors...

All ok. installed openwrt