I just got an WRT1900AC v1, and after playing a little with oficial firmware, just changed to OpenWRT
https://drive.google.com/open?id=0BwPiN … mpSaEwtMWs
I've used this firmware link above, i think is the lastest one right now, with good options. The flash was OK.
But i'm facing 2 problems
1 - cannot make my internet work proper - My FTTH ISP uses PPPoE and request VLAN 10 for internet.
I cannot make the VLAN proper work. On my tplink 1043 and tplink 4300 it works, i tagg like this and it works ...
I just bind like this and change to pppoe and i can dial and it works
But cannot make it work for WRT 1900AC v1.
( The PPPoE WAN needs to be on VLAN 10 ) all other 4 LAN not ... it will work with dhcp and works like a charm as i said on the other routers.
2 Problem ... i cannot try other OpenWRT/LEDE imgs. When i try to change to official build, or other builds like suggested on wiki, i got error ( the img file does not contain supported format, double check file and try again )
So like this, i cannot update to current openwrt oficial image, or other build ... only this: https://davidc502sis.dynamic-dns.net/ and the one from the link on @villeneuve
sign c7v2|c5v1 & WRTxx00ACx Images: Stuff )
Cannot even revert back to original firmware as it claims not supported format.
Can someone help me ??