OpenWrt Forum Archive

Topic: Flashing image LEDE 1043

The content of this topic has been archived on 28 Apr 2018. There are no obvious gaps in this topic, but there may still be some posts missing at the end.

Post #1
madhumaltheshn
21 Mar 2017, 08:38

After Flashing the LEDE 1043 image to the board and opening the GUI in the browser its giving

" Sorry, there is no sysupgrade support present; a new firmware image must be flashed manually. Please refer to the wiki for device specific install instructions ". How to solve this error.

(Last edited by madhumaltheshn on 23 Mar 2017, 07:12)

Post #2
ulmwind
21 Mar 2017, 21:34

What device do you have?

Post #3
madhumaltheshn
22 Mar 2017, 06:30

Accton

The discussion might have continued from here.