root@OpenWrt:~# opkg update
Downloading http://downloads.openwrt.org/snapshots/ … ckages.gz.
.
.
.
Downloading http://downloads.openwrt.org/snapshots/ … ckages.gz.
Updated list of available packages in /var/opkg-lists/designated_driver_management.
Downloading http://downloads.openwrt.org/snapshots/ … kages.sig.
Signature check passed.
root@OpenWrt:~# opkg install sfdisk
Installing sfdisk (2.28-1) to root...
Downloading http://downloads.openwrt.org/snapshots/ … r71xx.ipk.
Installing librt (1.1.16-1) to root...
Downloading http://downloads.openwrt.org/snapshots/ … r71xx.ipk.
Installing libpthread (1.1.16-1) to root...
Downloading http://downloads.openwrt.org/snapshots/ … r71xx.ipk.
Configuring libpthread.
Configuring librt.
Configuring sfdisk.
root@OpenWrt:~# sfdisk
-ash: sfdisk: not found
root@OpenWrt:~#
Topic: sfdisk does not work.. (DESIGNATED DRIVER (Bleeding Edge, 50104))
The content of this topic has been archived on 5 May 2018. There are no obvious gaps in this topic, but there may still be some posts missing at the end.
Depending on how old your installed snapshot is you're probably seeing library mismatches
Ok..
git clone h..ps://github.com/openwrt/openwrt.git
cd op*
git pull
./scripts/feeds update -a
./scripts/feeds install -a
make menuconfig
<utilites->disc->sfdisk [X]->save->exit>
make
write to router...
login...
root@OpenWrt:~# sfdisk
-ash: sfdisk: not found
print screen:
h..ps://drive.google.com/open?id=0BzXEq3NLPH3WRVlxRzNpRDZ5Unc
Maybe the executable is written to a (non-standard) location that is not in your $PATH? Can you run it with the full path?
In a previous message...
h..ps://drive.google.com/open?id=0BzXEq3NLPH3WRVlxRzNpRDZ5Unc
Replace in the link .. by tt
btw, if you're using trunk you probably want to switch to LEDE.
The discussion might have continued from here.