Re: New Release Candidate

thank you evildevil for your information!
i'm just in flashing my wgt and looking forward for the new openwrt! ^____^

Re: New Release Candidate

hm T_T
does anyone know how to get wireless working on an wgt634u?
looks like none madwifi is installed (got an atheros wlan card, get none output after dmesg and co! >.<')

53

Re: New Release Candidate

Hi.

Try this:

opkg update
opkg install kmod-madwifi
wifi detect > /etc/config/wireless
uci set wireless.@wifi-device[0].disabled=0
uci set wireless.@wifi-device[0].channel=5
wifi

If that works, wireless is started on channel 5, ssid is OpenWrt and no encryption is configured.

~ JoW

Re: New Release Candidate

@jow

thank you, that made it! ^^
i thought madwifi was already installed and didn't find it ^^''.
that was my problem.
thank you!

greetings,
nico

ps: YEAH! power saving on my pirelli does work now! YEAH!!! *_____*

Re: New Release Candidate

@DeusExMachina:

You'll need kmod-madwifi for basic Wifi functionality + either hostapd if you want the WGT634U to act as an WPA/WPA2 AP or wpa-supplicant if you want it to use as an WPA/WPA2 client.

Regards,
Patrick

PS:
There's a kernel module for the Broadcom encryption acceleration chip on the WGT, (kmod-ocf-ubsec-ssb) but according to http://www.danm.de/files/src/bcm5365p/ it does not work.

--
Backfire 10.03.1 on TP-Link TL-WR1043ND,
Barrier Breaker on TP-Link TL-WR941ND,
Backfire (r22711) on Linksys WRT54G v3.1

Re: New Release Candidate

Is there a roadmap for 8.09? I'd like to know about RC2, Beta 1, etc...

Also, how come snapshots do not have LuCI? (Or at least 11/16/2008 didn't)

Re: New Release Candidate

Can the profile for the Asus WL-500gP (with default broadcom wireless) be included in 8.09? It's a quite common platform and would be nice to have binary packages for it. For the profile file see:
https://dev.openwrt.org/ticket/4191

Re: New Release Candidate

How can I turn on 32M of memory on my WL-500gP box using 8.09 RC1?

There are only commands with nvram utility on Wiki and nvram command is not available anymore:

nvram set sdram_init=0x0009
nvram set sdram_ncdl=0x10308
nvram commit
reboot

Re: New Release Candidate

http://luci.freifunk-halle.net/UserDocs … ramcommand

Re: New Release Candidate

Please, when would be support for the SpeedTouch 580 that has cpu BCM6345KPB and wireless mini adapter BCM4306KPB and switch BCM5325MA2QM.

Re: New Release Candidate

Can someone create a binary firmware for the SpeedTouch 580 that has BCM6345 ..please.........?

Re: New Release Candidate

Hey.. great work. I will definitely try this one and I like to say thanks to all the team members for this..

Re: New Release Candidate

Could you release candidate for Backfire 10.03.2 ? You've been nicely often releasing backfire candidates and now it has stopped even source is sill being updated. Any chance to get new bacfire compiled on official site?

Re: New Release Candidate

I would very much appreciate it as well.

65 (edited by saidiadude 2012-07-30 06:40:03)

Re: New Release Candidate

Will the Belkin N300 HD (F7D3301 or F7D7301, Broadcom BCM4716) or the Belkin N600 HD (F7D8301,  Broadcom BCM4323) be supported in the 10.03.2 release?
Thanks for all the hard work you have put into this project.

Re: New Release Candidate

ye. that would be nice

thanks

Re: New Release Candidate

Congratulations to all the developers. The hardwork of all the developers are appreciated.

68 (edited by happy 2017-02-21 22:31:16)

Re: New Release Candidate

Thanks to everyone who spend their time developing OpenWrt  :-)

I flashed a router for the very first time 4 days ago (15.05.1 on a TL-WR1043ND), expecting to spend hours in SSH getting my VLANs configured correctly. Boy, was I wrong :-) The web interface is very nice, and the extensive documentation likewise.

Did I mention that the FailSafe mode saved my butt when I managed to lock myself out? That feature alone is enough to convince me to stick to OpenWRT. An awsome feature :-)

Again, thanks to EVERYONE who continue to contribute to this FOSS gem.   Thank you!

Re: New Release Candidate

Congratulations!
Best of luck!!!

Re: New Release Candidate

thisisnasrin wrote:

Congratulations!
Best of luck!!!

I have looked at all your 6 posts (as of this writing) and they are meaningless to any discussion threads you posted to, except they all contained your signature which pointed to an ad driven website. For that reason, I have removed the link from your signature that violates OpenWRT' ToS. Just a friendly reminder.

Mazi

Re: New Release Candidate

When will the new release of OpenWrt ?

Re: New Release Candidate

No update yet, last release was in 2016. (Bleeding edge / trunk)

Re: New Release Candidate

No update yet, last release was in 2017.