Hi all. I am new here. I successfully installed an openWRT router (out of a Linksys EA4500). Now I am able to:
1. Browse internet
2. Open multicast streams sourced by ISP (232.x.y.z) on the Home PC
3. Establish a VPN connection over OpenVPN to this router from a different ISP (openvpn over TUN) and connect to local resources.
The last thing I want to establish is watching multicast streams over OpenVPN. In other words I want to create an openVPN connection to the openwrt router and connect to the multicast addresses which do work from the Home PC. I am not able to despite creating:
config rule
option name 'Multicast2VPN'
option src 'wan'
option proto 'udp'
option dest 'vpn'
option dest_ip '224.0.0.0/4'
option target 'ACCEPT'
option family 'ipv4'
and
config interface 'vpn0'
option ifname 'tun0'
option proto 'none'
option auto '1'
option igmp_snooping '1'
and lastly
config openvpn 'myvpn'
option enabled '1'
option verb '3'
option port '1194'
option proto 'udp'
option dev 'tun'
option server '10.8.0.0 255.255.255.0'
option keepalive '10 120'
option ca '/etc/openvpn/ca.crt'
option cert '/etc/openvpn/my-server.crt'
option key '/etc/openvpn/my-server.key'
option dh '/etc/openvpn/dh2048.pem'
list push 'redirect-gateway def1'
The topology is very easy: I am not able to add images here
Any suggestions what should be added to my cnfiguration? Thanx !!!