OpenWrt Forum Archive

Topic: Different wget versions

The content of this topic has been archived on 30 Apr 2018. There are no obvious gaps in this topic, but there may still be some posts missing at the end.

I'm seeing different commands available to me from different routers. The thing is they are from the same firmware and wget is showing same exact version of wget - 1.18-2.

In one I have limited options which is killing me as I need to recursively download:

ipks# wget --help
wget: unrecognized option: help
Usage: wget [options] <>
Options:
        -4:                             Use IPv4 only
        -6:                             Use IPv6 only
        -q:                             Turn off status messages
        -O <file>:                      Redirect output to file (use "-" for stdout)
        -P <dir>:                       Set directory for output files
        --user=<user>                   HTTP authentication username
        --password=<password>           HTTP authentication password
        --user-agent|-U <str>           Set HTTP user agent
        --post-data=STRING              use the POST method; send STRING as the data
        --spider|-s                     Spider mode - only check file existence
        --timeout=N|-T N                Set connect/request timeout to N seconds
        --proxy=on|off|-Y on|off        Enable/disable env var configured proxy

HTTPS options:
        --ca-certificate=<cert>:        Load CA certificates from file <cert>
        --no-check-certificate:         don't validate the server's certificate

root@Need-Config:/tmp/ipks#



The other I have full commands:

root@TEST1:/tmp# wget --help
GNU Wget 1.18, a non-interactive network retriever.
Usage: wget [OPTION]... []...

Mandatory arguments to long options are mandatory for short options too.

Startup:
  -V,  --version                   display the version of Wget and exit
  -h,  --help                      print this help
  -b,  --background                go to background after startup
  -e,  --execute=COMMAND           execute a `.wgetrc'-style command

Logging and input file:
  -o,  --output-file=FILE          log messages to FILE
  -a,  --append-output=FILE        append messages to FILE
  -d,  --debug                     print lots of debugging information
  -q,  --quiet                     quiet (no output)
  -v,  --verbose                   be verbose (this is the default)
  -nv, --no-verbose                turn off verboseness, without being quiet
       --report-speed=TYPE         output bandwidth as TYPE.  TYPE can be bits
  -i,  --input-file=FILE           download s found in local or external FILE
  -F,  --force-html                treat input file as HTML
  -B,  --base=                resolves HTML input-file links (-i -F)
                                     relative to
       --config=FILE               specify config file to use
       --no-config                 do not read any config file
       --rejected-log=FILE         log reasons for  rejection to FILE

Download:
  -t,  --tries=NUMBER              set number of retries to NUMBER (0 unlimits)
       --retry-connrefused         retry even if connection is refused
  -O,  --output-document=FILE      write documents to FILE
  -nc, --no-clobber                skip downloads that would download to
                                     existing files (overwriting them)
  -c,  --continue                  resume getting a partially-downloaded file
       --start-pos=OFFSET          start downloading from zero-based position OFFSET
       --progress=TYPE             select progress gauge type
       --show-progress             display the progress bar in any verbosity mode
  -N,  --timestamping              don't re-retrieve files unless newer than
                                     local
       --no-if-modified-since      don't use conditional if-modified-since get
                                     requests in timestamping mode
       --no-use-server-timestamps  don't set the local file's timestamp by
                                     the one on the server
  -S,  --server-response           print server response
       --spider                    don't download anything
  -T,  --timeout=SECONDS           set all timeout values to SECONDS
       --dns-timeout=SECS          set the DNS lookup timeout to SECS
       --connect-timeout=SECS      set the connect timeout to SECS
       --read-timeout=SECS         set the read timeout to SECS
  -w,  --wait=SECONDS              wait SECONDS between retrievals
       --waitretry=SECONDS         wait 1..SECONDS between retries of a retrieval
       --random-wait               wait from 0.5*WAIT...1.5*WAIT secs between retrievals
       --no-proxy                  explicitly turn off proxy
  -Q,  --quota=NUMBER              set retrieval quota to NUMBER
       --bind-address=ADDRESS      bind to ADDRESS (hostname or IP) on local host
       --limit-rate=RATE           limit download rate to RATE
       --no-dns-cache              disable caching DNS lookups
       --restrict-file-names=OS    restrict chars in file names to ones OS allows
       --ignore-case               ignore case when matching files/directories
  -4,  --inet4-only                connect only to IPv4 addresses
  -6,  --inet6-only                connect only to IPv6 addresses
       --prefer-family=FAMILY      connect first to addresses of specified family,
                                     one of IPv6, IPv4, or none
       --user=USER                 set both ftp and http user to USER
       --password=PASS             set both ftp and http password to PASS
       --ask-password              prompt for passwords
       --no-iri                    turn off IRI support
       --local-encoding=ENC        use ENC as the local encoding for IRIs
       --remote-encoding=ENC       use ENC as the default remote encoding
       --unlink                    remove file before clobber

Directories:
  -nd, --no-directories            don't create directories
  -x,  --force-directories         force creation of directories
  -nH, --no-host-directories       don't create host directories
       --protocol-directories      use protocol name in directories
  -P,  --directory-prefix=PREFIX   save files to PREFIX/..
       --cut-dirs=NUMBER           ignore NUMBER remote directory components

HTTP options:
       --http-user=USER            set http user to USER
       --http-password=PASS        set http password to PASS
       --no-cache                  disallow server-cached data
       --default-page=NAME         change the default page name (normally
                                     this is 'index.html'.)
  -E,  --adjust-extension          save HTML/CSS documents with proper extensions
       --ignore-length             ignore 'Content-Length' header field
       --header=STRING             insert STRING among the headers
       --max-redirect              maximum redirections allowed per page
       --proxy-user=USER           set USER as proxy username
       --proxy-password=PASS       set PASS as proxy password
       --referer=             include 'Referer: ' header in HTTP request
       --save-headers              save the HTTP headers to file
  -U,  --user-agent=AGENT          identify as AGENT instead of Wget/VERSION
       --no-http-keep-alive        disable HTTP keep-alive (persistent connections)
       --no-cookies                don't use cookies
       --load-cookies=FILE         load cookies from FILE before session
       --save-cookies=FILE         save cookies to FILE after session
       --keep-session-cookies      load and save session (non-permanent) cookies
       --post-data=STRING          use the POST method; send STRING as the data
       --post-file=FILE            use the POST method; send contents of FILE
       --method=HTTPMethod         use method "HTTPMethod" in the request
       --body-data=STRING          send STRING as data. --method MUST be set
       --body-file=FILE            send contents of FILE. --method MUST be set
       --content-disposition       honor the Content-Disposition header when
                                     choosing local file names (EXPERIMENTAL)
       --content-on-error          output the received content on server errors
       --auth-no-challenge         send Basic HTTP authentication information
                                     without first waiting for the server's
                                     challenge

HTTPS (SSL/TLS) options:
       --secure-protocol=PR        choose secure protocol, one of auto, SSLv2,
                                     SSLv3, TLSv1 and PFS
       --https-only                only follow secure HTTPS links
       --no-check-certificate      don't validate the server's certificate
       --certificate=FILE          client certificate file
       --certificate-type=TYPE     client certificate type, PEM or DER
       --private-key=FILE          private key file
       --private-key-type=TYPE     private key type, PEM or DER
       --ca-certificate=FILE       file with the bundle of CAs
       --ca-directory=DIR          directory where hash list of CAs is stored
       --crl-file=FILE             file with bundle of CRLs
       --pinnedpubkey=FILE/HASHES  Public key (PEM/DER) file, or any number
                                   of base64 encoded sha256 hashes preceded by
                                   'sha256//' and seperated by ';', to verify
                                   peer against
       --random-file=FILE          file with random data for seeding the SSL PRNG
       --egd-file=FILE             file naming the EGD socket with random data

HSTS options:
       --no-hsts                   disable HSTS
       --hsts-file                 path of HSTS database (will override default)

FTP options:
       --ftp-user=USER             set ftp user to USER
       --ftp-password=PASS         set ftp password to PASS
       --no-remove-listing         don't remove '.listing' files
       --no-glob                   turn off FTP file name globbing
       --no-passive-ftp            disable the "passive" transfer mode
       --preserve-permissions      preserve remote file permissions
       --retr-symlinks             when recursing, get linked-to files (not dir)

FTPS options:
       --ftps-implicit                 use implicit FTPS (default port is 990)
       --ftps-resume-ssl               resume the SSL/TLS session started in the control connection when
                                         opening a data connection
       --ftps-clear-data-connection    cipher the control channel only; all the data will be in plaintext
       --ftps-fallback-to-ftp          fall back to FTP if FTPS is not supported in the target server
WARC options:
       --warc-file=FILENAME        save request/response data to a .warc.gz file
       --warc-header=STRING        insert STRING into the warcinfo record
       --warc-max-size=NUMBER      set maximum size of WARC files to NUMBER
       --warc-cdx                  write CDX index files
       --warc-dedup=FILENAME       do not store records listed in this CDX file
       --no-warc-compression       do not compress WARC files with GZIP
       --no-warc-digests           do not calculate SHA1 digests
       --no-warc-keep-log          do not store the log file in a WARC record
       --warc-tempdir=DIRECTORY    location for temporary files created by the
                                     WARC writer

Recursive download:
  -r,  --recursive                 specify recursive download
  -l,  --level=NUMBER              maximum recursion depth (inf or 0 for infinite)
       --delete-after              delete files locally after downloading them
  -k,  --convert-links             make links in downloaded HTML or CSS point to
                                     local files
       --convert-file-only         convert the file part of the only (usually known as the basename)
       --backups=N                 before writing file X, rotate up to N backup files
  -K,  --backup-converted          before converting file X, back up as X.orig
  -m,  --mirror                    shortcut for -N -r -l inf --no-remove-listing
  -p,  --page-requisites           get all images, etc. needed to display HTML page
       --strict-comments           turn on strict (SGML) handling of HTML comments

Recursive accept/reject:
  -A,  --accept=LIST               comma-separated list of accepted extensions
  -R,  --reject=LIST               comma-separated list of rejected extensions
       --accept-regex=REGEX        regex matching accepted
       --reject-regex=REGEX        regex matching rejected
       --regex-type=TYPE           regex type (posix|pcre)
  -D,  --domains=LIST              comma-separated list of accepted domains
       --exclude-domains=LIST      comma-separated list of rejected domains
       --follow-ftp                follow FTP links from HTML documents
       --follow-tags=LIST          comma-separated list of followed HTML tags
       --ignore-tags=LIST          comma-separated list of ignored HTML tags
  -H,  --span-hosts                go to foreign hosts when recursive
  -L,  --relative                  follow relative links only
  -I,  --include-directories=LIST  list of allowed directories
       --trust-server-names        use the name specified by the redirection
                                     s last component
  -X,  --exclude-directories=LIST  list of excluded directories
  -np, --no-parent                 don't ascend to the parent directory

Mail bug reports and suggestions to <bug-wget@gnu.org>
root@TEST1:/tmp#


What's that about and how do I get the full version on both?  I tried opkg install wget and opkg upgrade wget and it didnt do anything. Thanks.

CB

sloppyTypist wrote:

What's that about and how do I get the full version on both?  I tried opkg install wget and opkg upgrade wget and it didnt do anything. Thanks.

CB

Do:

ls -la $(which wget)

To confirm wherever it's a full wget or symlink to busybox. Install full wget with:

opkg update; opkg install wget

If the above does not work, use my NGINX SSL tutorial but replace nginx with wget, and build your own copy tongue

There is wget as a standalone (and complete) program, and there is wget as a busybox command (and reduced). Use "which wget" to determine which executable you are using in each machine; I bet in one of them "wget" is just a symlink to busybox.

Normally, when you install the full wget package, the complete binary replaces the symbolic link; I guess there was something wrong with your installation.

The discussion might have continued from here.