Hello guys thanks for your hard work on this device.
I totally don´t have any plan about router firmwares ...
I really need some extra features on this router, because we (4 persons) have only 100 gb traffic (i would manage a fair distribution) and i need a dbm display for set up the external antenna.
Does this features are supported by openwrt ?
Does it exist a openwrt flashable file already (like the official normal updates) ?
Edit1:
Wow i finally made it:
-Download a program "tftpd32" (zip). Download "ArcherC2V1_tp_recovery.bin", copy that file into a ordner.
-Shut off router.
-Connect your device via lan/wan.
-Go to lan adapter settings, edit ipv4 - ip 192.168.0.66 and mask 255.255.0.0
-Open tftpd32 and choose/browse the ordner with the file ArcherC2V1_tp_recovery.bin, check "show Dir" if the right file choosen
-Choose the correct ip (192.168.0.66) for "server interface"
-Press and hold reset button, power on router- keep holding reset button (not hold the power on) until the update symbol on the router appears.
-On the pc there should appear now a window where the file got uploaded.
-Done
I had to try 3 different devices, because it doesn´t work.
My question how to show the ASU / dbm (Signal strength) value ? I have to install a "software/module" ?
And how i can limit the traffic for each person/mac (for example 1gb for each every day) ?
(Last edited by Deam on 9 Dec 2016, 19:11)