The content of this topic has been archived on 22 Apr 2018. There are no obvious gaps in this topic, but there may still be some posts missing at the end.
Hello. I have a router Linksys e1200 v2. After flashing OpenWRT I can not install and configure wifi. As I step to install the driver on Wi Fi? or what to do to make the Wi Fi? Help. I am new to Open WRT.
a few photos
https://drive.google.com/drive/folders/ … m9rcFlSTlE
Filled the latest firmware
openwrt-15.05.1-brcm47xx-mips74k-linksys-e1200-v2-squashfs.bin - 15-Mar-2016 17:56
(Last edited by esporao on 6 Oct 2016, 18:40)
Thanks for the reply. I tried to put the driver. Nothing I did not. Add screenshots of logs. Can see that Open WRT finds the radio module, but does not support it. Please take a look and tell me what to do next. PS I am a newbie in Linux and Open WRT
https://drive.google.com/open?id=0B0jze … khOQVJrWmM
https://drive.google.com/open?id=0B0jze … UJYa2dIZmM
Zajec's response guides you to the part of the wiki that states:
It does not support new chipsets (BCM5356, BCM5357, BCM5358, BCM47186, BCM4331)
Additionally you can check the b43 soc support page and you'll see that it's not supported in the kernel.
Zajec's response guides you to the part of the wiki that states:
It does not support new chipsets (BCM5356, BCM5357, BCM5358, BCM47186, BCM4331)
Additionally you can check the b43 soc support page and you'll see that it's not supported in the kernel.
Okay. What then are the options? What to do? OpenWRT is not supported comes out?
t3hn00b wrote:Zajec's response guides you to the part of the wiki that states:
It does not support new chipsets (BCM5356, BCM5357, BCM5358, BCM47186, BCM4331)
Additionally you can check the b43 soc support page and you'll see that it's not supported in the kernel.
Okay. What then are the options? What to do? OpenWRT is not supported comes out?
You can flash back to stock in Luci > System > Backup/Flash firmware. If you don't want to stay on stock the e1200 v2 appears to be supported by dd-wrt.
as i understand we should use bcm947xx for those device
up post
The discussion might have continued from here.