OpenWrt Forum Archive

Topic: Hyper-V and OpenWrt

The content of this topic has been archived on 28 Apr 2018. There are no obvious gaps in this topic, but there may still be some posts missing at the end.

Post #1
carlberg
14 Sep 2016, 03:03

Hi all,

It seem that folks are running OpenWrt (trunk, +15.05.1) in Hyper-V with working networking..
But I cant seem to get it to load the network drivers.
Found some older posts about the tulip driver.
https://miracoin.wordpress.com/2014/05/ … nt-page-1/

and I even found this where someone added choices to the menuconfig..even converted the image to a vhd..
https://soha.moe/post/make-openwrt-fits-hyperv.html

I have tested build a image for x86 and with the kmod-tulip, but I still cant get the eth0 up and running.

Any ideas/links/guides?

Cheers
-Anders

Post #2
carlberg
22 Sep 2016, 22:21

found the problem, just add a Legacy Network Adapter...

The discussion might have continued from here.