Hi,
I want to install my alfa awus036h with my tp-wr703n to create a wifi bridge. I got everything working but the speed is very slow. the txpower show 0dbm and i can't change to anything higher. The internal wifi @18db is a lot faster.
Is there some special file i need to change?
I am running Bleeding Edge, r33288
opkg update
opkg install kmod-usb-storage
opkg install kmod-rtl8187
root@OpenWrt:/etc/config# iwconfig
lo no wireless extensions.
wlan0 IEEE 802.11bg ESSID:off/any
Mode:Managed Access Point: Not-Associated Tx-Power=0 dBm
RTS thr:off Fragment thr:off
Encryption key:off
Power Management:off
eth0 no wireless extensions.
br-lan no wireless extensions.
/etc/config/wireless setting
config wifi-device radio1
option type mac80211
option channel 6
option macaddr 00:xx:xx:xx:xx:xx
option hwmode 11g
config wifi-iface
option device radio1
option network wwan
option mode sta
option ssid linksys
option encryption none
/etc/config/network setting
config interface 'loopback'
option ifname 'lo'
option proto 'static'
option ipaddr '127.0.0.1'
option netmask '255.0.0.0'
config interface 'lan'
option ifname 'eth0'
option proto 'static'
option ipaddr '192.168.1.100'
option netmask '255.255.255.0'
config interface 'wwan'
option proto 'dhcp'
config interface 'stabridge'
option proto 'relay'
option network 'lan wwan'
Wiphy phy0
Band 1:
Frequencies:
* 2412 MHz [1] (0.0 dBm)
* 2417 MHz [2] (0.0 dBm)
* 2422 MHz [3] (0.0 dBm)
* 2427 MHz [4] (0.0 dBm)
* 2432 MHz [5] (0.0 dBm)
* 2437 MHz [6] (0.0 dBm)
* 2442 MHz [7] (0.0 dBm)
* 2447 MHz [8] (0.0 dBm)
* 2452 MHz [9] (0.0 dBm)
* 2457 MHz [10] (0.0 dBm)
* 2462 MHz [11] (0.0 dBm)
* 2467 MHz [12] (disabled)
* 2472 MHz [13] (disabled)
* 2484 MHz [14] (disabled)
Bitrates (non-HT):
* 1.0 Mbps
* 2.0 Mbps
* 5.5 Mbps
* 11.0 Mbps
* 6.0 Mbps
* 9.0 Mbps
* 12.0 Mbps
* 18.0 Mbps
* 24.0 Mbps
* 36.0 Mbps
* 48.0 Mbps
* 54.0 Mbps
max # scan SSIDs: 4
max scan IEs length: 2285 bytes
Coverage class: 0 (up to 0m)
Supported Ciphers:
* WEP40 (00-0f-ac:1)
* WEP104 (00-0f-ac:5)
* TKIP (00-0f-ac:2)
* CCMP (00-0f-ac:4)
Available Antennas: TX 0 RX 0
Supported interface modes:
* IBSS
* managed
* monitor
software interface modes (can always be added):
* monitor
interface combinations are not supported