I was looking for a fix for my WR340GD (the wan port is dead), but after reading the tutorial for using the vxKiller FW, I'll rather try to replace the damn HST1025DR IC.
P/S: Good job xssa.
The content of this topic has been archived between 31 Aug 2014 and 5 May 2018. Unfortunately there are posts – most likely complete pages – missing.
I was looking for a fix for my WR340GD (the wan port is dead), but after reading the tutorial for using the vxKiller FW, I'll rather try to replace the damn HST1025DR IC.
P/S: Good job xssa.
hi
do you know how to update md5 for TL-WA5210G firmware? i've tried following jvvh5897's method described in this thread https://forum.openwrt.org/viewtopic.php?pid=327259 but it did not work. maybe it would be possible to squeeze basic networking, ssh server and wifi driver in 1.1MB image?
Where is original firmware for it?
Hi Can i flash xsaa openwrt or should i use this http://www.lan23.ru/forum/showthread.php?t=8630 ? My router is wr340g v 4.0
Thanks
Anyone ?
TL-WR340GD v4 has AR9331 so nothing to do with. You have to look at ar71 target platform.
I have TP-LINK 340G V2.3 (on sticker) REV 5.4 on PCB:
I read all topic and download this files:
wr340v5_linux.bin (tl-340g-linux_606fe38dda4014fb8f16b9b8a27cee3e.rar)
downgrade340.bin
openwrt-atheros-vmlinux.lzma
rootsq.rom
Please write how flash to work OpenWrt. I understand that it works only serial console and TFTP Server/Client and no work DHCP, Wifi, WebUI, SSH and RootFS is read only - right?
I need flash like in WR542G ???
https://wiki.openwrt.org/toh/tp-link/tl-wr542g#installation_of_vxkiller-image
P.S. I was programming already original firmware using SPI LPT:
Thanks.
(Last edited by Gelip on 15 Aug 2016, 07:12)
Mostly all instructions are given on this topic, and are duplicated on https://wiki.openwrt.org/toh/tp-link/tl … ller-image
You don't need spigm to flash. But serial console adapter cable is highly reccomended.
The download links (here: Kernel RootFS ) are not working anymore. Can someone post these files again?
wr340v5_linux.bin (there is only wr340v3_linux.bin)
Kernel (custom load address for kernel is 80033800)
RootFS (IP Address is 192.168.1.55 logon with root/ar2317)
I have got problem with wr340g v3. I 've upload wr340v3_linux.bin via website, but I didn't back it to default settings before (router IP was set to 192 168 0 9). Now its working when I connect it to router with dhcp and to pc via lan, but cannot ping and telnet 192 168 1 1, even when trying to get into redboot nothing happen... only "192 168 1 1 HOST UNREACHABLE" response, any solutions?
(Last edited by merfik1 on 1 Feb 2017, 16:30)
Hi! Can you help me? I have wr642g with wan port broken. If it's possible i would like to use it as WiFi-repeater (to catch other router's wifi and then connect by cable to my pc). If i'm not mistaken this is it's specs wikidevi.com/wiki/TP-LINK_TL-WR642G_v3.6
Maybe model of flash and ram can be different - i don't know, but in generally like this: atheros ar2318, 2 mb flash and 8 mb ram.
I wanted to try this issue wiki.openwrt.org/toh/tp-link/tl-wr542g
But links are broken, i couldn't download images. Can you help me? Maybe you could make openwrt image exactly for my case and tasks? I would be very grateful
(Last edited by aleks-krivich on 17 Feb 2017, 08:30)
@aleks-krivich
You need to know exactly what is inside your wr642g. Good internal photos would be enough. Depends off there 2 different solutions for you.
The discussion might have continued from here.