Topic: [SOLVED] openwrt on Raspberry Pi 3 no wifi

The content of this topic has been archived on 6 May 2018. There are no obvious gaps in this topic, but there may still be some posts missing at the end.

Page 1 of 1

Post #1

marcin.kasinski

19 Mar 2016, 08:30

Hi ,

I have actual sources from trunk.

I've compiled image for RPi 3 from profile.

Problem is that I don't see wifi menu in LUCI.

cat /sys/kernel/debug/usb/devices
T:  Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=480  MxCh= 1
B:  Alloc=  0/800 us ( 0%), #Int= -1, #Iso=  0
D:  Ver= 2.00 Cls=09(hub  ) Sub=00 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=1d6b ProdID=0002 Rev= 4.04
S:  Manufacturer=Linux 4.4.6 dwc_otg_hcd
S:  Product=DWC OTG Controller
S:  SerialNumber=3f980000.usb
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=  0mA
I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
E:  Ad=81(I) Atr=03(Int.) MxPS=   4 Ivl=256ms

T:  Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  2 Spd=480  MxCh= 5
D:  Ver= 2.00 Cls=09(hub  ) Sub=00 Prot=02 MxPS=64 #Cfgs=  1
P:  Vendor=0424 ProdID=9514 Rev= 2.00
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=  2mA
I:  If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=01 Driver=hub
E:  Ad=81(I) Atr=03(Int.) MxPS=   1 Ivl=256ms
I:* If#= 0 Alt= 1 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=02 Driver=hub
E:  Ad=81(I) Atr=03(Int.) MxPS=   1 Ivl=256ms

T:  Bus=01 Lev=02 Prnt=02 Port=00 Cnt=01 Dev#=  3 Spd=480  MxCh= 0
D:  Ver= 2.00 Cls=ff(vend.) Sub=00 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=0424 ProdID=ec00 Rev= 2.00
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=  2mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=ff Driver=smsc95xx
E:  Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=83(I) Atr=03(Int.) MxPS=  16 Ivl=1ms
root@OpenWrt:~#

opkg list | grep brc
brcm2708-gpu-fw - 20160304-1
brcmfmac-firmware-sdio - 2016-01-25-52442afee9907bc32a058f22bb3295d040677c26-1
brcmfmac-firmware-usb - 2016-01-25-52442afee9907bc32a058f22bb3295d040677c26-1
kmod-brcmfmac - 4.4.6+2016-01-10-1
kmod-brcmutil - 4.4.6+2016-01-10-1
root@OpenWrt:~#

Another problem is that when I want to save something I got error :Read-only file system

(Last edited by marcin.kasinski on 22 Mar 2016, 19:22)

Post #2

bolvan

19 Mar 2016, 09:33

marcin.kasinski wrote:

I want to save something I got error :Read-only file system

post here output of "mount"
What is the name of the image file ?
For example, for banana pi i have openwrt-sunxi-Bananapi-sdcard-vfat-ext4.img
It means that it has 2 partitions : one vfat for boot and another one ext4 for rootfs

Post #3

marcin.kasinski

19 Mar 2016, 09:45

root@OpenWrt:~# mount
/dev/root on / type ext4 (ro,noatime,block_validity,delalloc,barrier,user_xattr,acl)
proc on /proc type proc (rw,nosuid,nodev,noexec,noatime)
sysfs on /sys type sysfs (rw,nosuid,nodev,noexec,noatime)
tmpfs on /tmp type tmpfs (rw,nosuid,nodev,noatime)
/dev/mmcblk0p1 on /boot type vfat (rw,noatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)
tmpfs on /dev type tmpfs (rw,nosuid,relatime,size=512k,mode=755)
devpts on /dev/pts type devpts (rw,nosuid,noexec,relatime,mode=600)
debugfs on /sys/kernel/debug type debugfs (rw,noatime)
root@OpenWrt:~#

Image file is openwrt-brcm2708-bcm2710-rpi-3-ext4-sdcard.img

Post #4

bolvan

19 Mar 2016, 10:00

Root file system mounted readonly.

/dev/root on / type ext4 (ro,noatime,block_validity,delalloc,barrier,user_xattr,acl)

Look dmesg and logread to find out why. It can be anything from filesystem errors to R/O switch on sdcard.

Post #5

marcin.kasinski

21 Mar 2016, 19:03

Hi,

Yesterday I compiled actual sources from trunk .

Now there is no filesystem error, but still there is no wifi.

Model Raspberry Pi 3 Model B Rev 1.2
Firmware Version OpenWrt Designated Driver r49054 / LuCI Master (git-16.080.40325-e2e2696)
Kernel Version 4.4.6

mount
/dev/root on / type ext4 (rw,noatime,block_validity,delalloc,barrier,user_xattr,acl)
proc on /proc type proc (rw,nosuid,nodev,noexec,noatime)
sysfs on /sys type sysfs (rw,nosuid,nodev,noexec,noatime)
tmpfs on /tmp type tmpfs (rw,nosuid,nodev,noatime)
/dev/mmcblk0p1 on /boot type vfat (rw,noatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)
tmpfs on /dev type tmpfs (rw,nosuid,relatime,size=512k,mode=755)
devpts on /dev/pts type devpts (rw,nosuid,noexec,relatime,mode=600)
debugfs on /sys/kernel/debug type debugfs (rw,noatime)
root@OpenWrt:~#

opkg list | grep brc
brcm2708-gpu-fw - 20160304-1
brcmfmac-firmware-sdio - 2016-01-25-52442afee9907bc32a058f22bb3295d040677c26-1
brcmfmac-firmware-usb - 2016-01-25-52442afee9907bc32a058f22bb3295d040677c26-1
kmod-brcmfmac - 4.4.6+2016-01-10-1
kmod-brcmutil - 4.4.6+2016-01-10-1
root@OpenWrt:~#

Post #6

Zajec

21 Mar 2016, 23:38

marcin.kasinski wrote:

Now there is no filesystem error, but still there is no wifi.

You missed a very good advice:

bolvan wrote:

Look dmesg and logread

Post #7

marcin.kasinski

22 Mar 2016, 07:30

dmesg
[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Linux version 4.4.6 (marcin@ubuntu) (gcc version 5.3.0 (OpenWrt GCC 5.3.0 r49054) ) #1 SMP Sun Mar 20 22:53:13 UTC 2016
[    0.000000] CPU: ARMv7 Processor [410fd034] revision 4 (ARMv7), cr=10c5383d
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] Machine model: Raspberry Pi 3 Model B Rev 1.2
[    0.000000] cma: Reserved 16 MiB at 0x3a000000
[    0.000000] Memory policy: Data cache writealloc
[    0.000000] On node 0 totalpages: 241664
[    0.000000] free_area_init_node: node 0, pgdat 80578ec0, node_mem_map b988e000
[    0.000000]   Normal zone: 1888 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 241664 pages, LIFO batch:31
[    0.000000] [bcm2709_smp_init_cpus] enter (9480->f3003010)
[    0.000000] [bcm2709_smp_init_cpus] ncores=4
[    0.000000] PERCPU: Embedded 12 pages/cpu @b984f000 s17984 r8192 d22976 u49152
[    0.000000] pcpu-alloc: s17984 r8192 d22976 u49152 alloc=12*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 239776
[    0.000000] Kernel command line: 8250.nr_uarts=1 dma.dmachans=0x7f35 bcm2708_fb.fbwidth=656 bcm2708_fb.fbheight=416 bcm2709.boardrev=0xa02082 bcm2709.serial=0x5b8af6e smsc95xx.macaddr=B8:27:EB:B8:AF:6E bcm2708_fb.fbswap=1 bcm2709.uart_clock=3000000 vc_mem.mem_base=0x3dc00000 vc_mem.mem_size=0x3f000000  dwc_otg.lpm_enable=0 console=ttyS0,115200 kgdboc=ttyS0,115200 console=tty1 root=/dev/mmcblk0p2 rootfstype=ext4 rootwait
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Memory: 935540K/966656K available (3922K kernel code, 124K rwdata, 1408K rodata, 220K init, 368K bss, 14732K reserved, 16384K cma-reserved)
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
[    0.000000]     vmalloc : 0xbb800000 - 0xff800000   (1088 MB)
[    0.000000]     lowmem  : 0x80000000 - 0xbb000000   ( 944 MB)
[    0.000000]     modules : 0x7f000000 - 0x80000000   (  16 MB)
[    0.000000]       .text : 0x80008000 - 0x8053cd4c   (5332 kB)
[    0.000000]       .init : 0x8053d000 - 0x80574000   ( 220 kB)
[    0.000000]       .data : 0x80574000 - 0x8059326c   ( 125 kB)
[    0.000000]        .bss : 0x8059326c - 0x805ef2ec   ( 369 kB)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] NR_IRQS:16 nr_irqs:16 16
[    0.000000] Architected cp15 timer(s) running at 19.20MHz (phys).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns
[    0.000008] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns
[    0.000022] Switching to timer-based delay loop, resolution 52ns
[    0.000196] Console: colour dummy device 80x30
[    0.000833] console [tty1] enabled
[    0.000877] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000)
[    0.000930] pid_max: default: 32768 minimum: 301
[    0.001064] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.001096] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.001792] CPU: Testing write buffer coherency: ok
[    0.002227] CPU0: update cpu_capacity 1024
[    0.002257] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[    0.002285] [bcm2709_smp_prepare_cpus] enter
[    0.002400] Setting up static identity map for 0x8240 - 0x8298
[    0.003590] [bcm2709_boot_secondary] cpu:1 started (0) 18
[    0.003885] [bcm2709_secondary_init] enter cpu:1
[    0.003915] CPU1: update cpu_capacity 1024
[    0.003921] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[    0.004217] [bcm2709_boot_secondary] cpu:2 started (0) 17
[    0.004423] [bcm2709_secondary_init] enter cpu:2
[    0.004442] CPU2: update cpu_capacity 1024
[    0.004448] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
[    0.004726] [bcm2709_boot_secondary] cpu:3 started (0) 18
[    0.004909] [bcm2709_secondary_init] enter cpu:3
[    0.004927] CPU3: update cpu_capacity 1024
[    0.004933] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
[    0.004985] Brought up 4 CPUs
[    0.005075] SMP: Total of 4 processors activated (153.60 BogoMIPS).
[    0.005101] CPU: All CPU(s) started in HYP mode.
[    0.005124] CPU: Virtualization extensions available.
[    0.013402] VFP support v0.3: implementor 41 architecture 3 part 40 variant 3 rev 4
[    0.013719] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.014387] pinctrl core: initialized pinctrl subsystem
[    0.014875] NET: Registered protocol family 16
[    0.019927] DMA: preallocated 4096 KiB pool for atomic coherent allocations
[    0.049944] cpuidle: using governor ladder
[    0.079962] cpuidle: using governor menu
[    0.085455] bcm2709: Mini UART enabled
[    0.085559] Serial: AMBA PL011 UART driver
[    0.085703] uart-pl011 3f201000.uart: could not find pctldev for node /soc/gpio@7e200000/uart0_pins, deferring probe
[    0.085892] bcm2835-mbox 3f00b880.mailbox: mailbox enabled
[    0.140864] bcm2835-dma 3f007000.dma: DMA legacy API manager at f3007000, dmachans=0x1
[    0.142204] SCSI subsystem initialized
[    0.142380] usbcore: registered new interface driver usbfs
[    0.142475] usbcore: registered new interface driver hub
[    0.142559] usbcore: registered new device driver usb
[    0.150042] raspberrypi-firmware soc:firmware: Attached to firmware from 2016-03-04 17:53
[    0.177029] clocksource: Switched to clocksource arch_sys_counter
[    0.184725] NET: Registered protocol family 2
[    0.185294] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[    0.185427] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[    0.185634] TCP: Hash tables configured (established 8192 bind 8192)
[    0.185737] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.185801] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.185999] NET: Registered protocol family 1
[    0.187657] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    0.196063] io scheduler noop registered
[    0.196102] io scheduler deadline registered
[    0.196160] io scheduler cfq registered (default)
[    0.198521] BCM2708FB: allocated DMA memory fa400000
[    0.198566] BCM2708FB: allocated DMA channel 0 @ f3007000
[    0.203298] Console: switching to colour frame buffer device 82x26
[    0.207194] Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled
[    0.209821] console [ttyS0] disabled
[    0.211068] 3f215040.uart: ttyS0 at MMIO 0x3f215040 (irq = 59, base_baud = 50000000) is a 16550
[    1.161123] console [ttyS0] enabled
[    1.168601] vc-cma: Videocore CMA driver
[    1.176150] vc-cma: vc_cma_base      = 0x00000000
[    1.184963] vc-cma: vc_cma_size      = 0x00000000 (0 MiB)
[    1.194862] vc-cma: vc_cma_initial   = 0x00000000 (0 MiB)
[    1.204852] vc-mem: phys_addr:0x00000000 mem_base=0x3dc00000 mem_size:0x3f000000(1008 MiB)
[    1.231354] brd: module loaded
[    1.244116] loop: module loaded
[    1.251074] vchiq: vchiq_init_state: slot_zero = 0xba480000, is_master = 0
[    1.264916] usbcore: registered new interface driver smsc95xx
[    1.275384] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
[    1.486051] Core Release: 2.80a
[    1.492267] Setting default values for core params
[    1.501197] Finished setting default values for core params
[    1.711676] Using Buffer DMA mode
[    1.718192] Periodic Transfer Interrupt Enhancement - disabled
[    1.728815] Multiprocessor Interrupt Enhancement - disabled
[    1.739015] OTG VER PARAM: 0, OTG VER FLAG: 0
[    1.747202] Dedicated Tx FIFOs mode
[    1.754145] WARN::dwc_otg_hcd_init:1047: FIQ DMA bounce buffers: virt = 0xba414000 dma = 0xfa414000 len=9024
[    1.772392] FIQ FSM acceleration enabled for :
[    1.772392] Non-periodic Split Transactions
[    1.772392] Periodic Split Transactions
[    1.772392] High-Speed Isochronous Endpoints
[    1.804180] dwc_otg: Microframe scheduler enabled
[    1.804229] WARN::hcd_init_fiq:413: FIQ on core 1 at 0x802965a4
[    1.814999] WARN::hcd_init_fiq:414: FIQ ASM at 0x8000ee78 length 36
[    1.826330] WARN::hcd_init_fiq:439: MPHI regs_base at 0xbb87e000
[    1.837287] dwc_otg 3f980000.usb: DWC OTG Controller
[    1.846516] dwc_otg 3f980000.usb: new USB bus registered, assigned bus number 1
[    1.859577] dwc_otg 3f980000.usb: irq 62, io mem 0x00000000
[    1.869805] Init: Port Power? op_state=1
[    1.877290] Init: Power Port (0)
[    1.883802] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.895981] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.908858] usb usb1: Product: DWC OTG Controller
[    1.917623] usb usb1: Manufacturer: Linux 4.4.6 dwc_otg_hcd
[    1.927795] usb usb1: SerialNumber: 3f980000.usb
[    1.936958] hub 1-0:1.0: USB hub found
[    1.944176] hub 1-0:1.0: 1 port detected
[    1.952091] dwc_otg: FIQ enabled
[    1.952099] dwc_otg: NAK holdoff enabled
[    1.952106] dwc_otg: FIQ split-transaction FSM enabled
[    1.952135] Module dwc_common_port init
[    1.952299] usbcore: registered new interface driver uas
[    1.962065] usbcore: registered new interface driver usb-storage
[    1.972959] mousedev: PS/2 mouse device common for all mice
[    1.983817] bcm2835-wdt 3f100000.watchdog: Broadcom BCM2835 watchdog timer
[    1.996205] sdhci: Secure Digital Host Controller Interface driver
[    2.007358] sdhci: Copyright(c) Pierre Ossman
[    2.007632] sdhost: log_buf @ ba413000 (fa413000)
[    2.087043] mmc0: sdhost-bcm2835 loaded - DMA enabled (>1)
[    2.099271] mmc-bcm2835 3f300000.mmc: mmc_debug:0 mmc_debug2:0
[    2.109857] mmc-bcm2835 3f300000.mmc: DMA channel allocated
[    2.147166] Indeed it is in host mode hprt0 = 00021501
[    2.147781] mmc0: host does not support reading read-only switch, assuming write-enable
[    2.150545] mmc0: new high speed SDHC card at address 0001
[    2.157116] sdhci-pltfm: SDHCI platform and OF driver helper
[    2.158785] NET: Registered protocol family 10
[    2.159484] mmcblk0: mmc0:0001 SD16G 14.6 GiB 
[    2.159665] NET: Registered protocol family 17
[    2.159717] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
[    2.159728] 8021q: 802.1Q VLAN Support v1.8
[    2.160178] Registering SWP/SWPB emulation handler
[    2.160764] vc-sm: Videocore shared memory driver
[    2.160771] [vc_sm_connected_init]: start
[    2.161152]  mmcblk0: p1 p2
[    2.161191] [vc_sm_connected_init]: end - returning 0
[    2.164271] 3f201000.uart: ttyAMA0 at MMIO 0x3f201000 (irq = 87, base_baud = 0) is a PL011 rev2
[    2.180390] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
[    2.181913] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[    2.183436] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[    2.186169] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
[    2.274039] mmc1: new high speed SDIO card at address 0001
[    2.360901] EXT4-fs (mmcblk0p2): mounted filesystem without journal. Opts: (null)
[    2.375309] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
[    2.387825] Freeing unused kernel memory: 220K (8053d000 - 80574000)
[    2.500365] init: Console is alive
[    2.507261] init: - watchdog -
[    2.527067] usb 1-1: new high-speed USB device number 2 using dwc_otg
[    2.538819] Indeed it is in host mode hprt0 = 00001101
[    2.715195] init: - preinit -
[    2.747348] usb 1-1: New USB device found, idVendor=0424, idProduct=9514
[    2.759473] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.773196] hub 1-1:1.0: USB hub found
[    2.774088] random: procd urandom read with 45 bits of entropy available
[    2.793011] hub 1-1:1.0: 5 ports detected
[    3.077050] usb 1-1.1: new high-speed USB device number 3 using dwc_otg
[    3.187247] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00
[    3.199740] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    3.215664] smsc95xx v1.0.4
[    3.279928] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-3f980000.usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:b8:af:6e
[    5.850781] mount_root: mounting /dev/root
[    5.859304] EXT4-fs (mmcblk0p2): warning: mounting unchecked fs, running e2fsck is recommended
[    5.878206] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
[    5.947164] procd: - early -
[    5.953273] procd: - watchdog -
[    6.573013] procd: - ubus -
[    6.631080] procd: - init -
[    7.169871] NET: Registered protocol family 8
[    7.178248] NET: Registered protocol family 20
[    7.202702] tun: Universal TUN/TAP device driver, 1.6
[    7.212280] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    7.228540] l2tp_core: L2TP core driver, V2.0
[    7.237942] l2tp_netlink: L2TP netlink interface
[    7.249970] gre: GRE over IPv4 demultiplexor driver
[    7.260165] ip_gre: GRE over IPv4 tunneling driver
[    7.273984] PPP generic driver version 2.4.2
[    7.286574] ip6_tables: (C) 2000-2006 Netfilter Core Team
[    7.306383] hidraw: raw HID events driver (C) Jiri Kosina
[    7.337423] Loading modules backported from Linux version v4.4-rc5-1913-gc8fdf68
[    7.351625] Backport generated by backports.git backports-20151218-0-g2f58d9d
[    7.366497] ip_tables: (C) 2000-2006 Netfilter Core Team
[    7.382222] nf_conntrack version 0.5.0 (14877 buckets, 59508 max)
[    7.529986] PPP MPPE Compression module registered
[    7.543193] NET: Registered protocol family 24
[    7.557049] PPTP driver version 0.8.5
[    7.566443] usbcore: registered new interface driver usbhid
[    7.576766] usbhid: USB HID core driver
[    7.591920] xt_time: kernel timezone is -0000
[    7.613972] l2tp_ppp: PPPoL2TP kernel driver, V2.0
[    7.636619] brcmfmac: brcmf_sdio_drivestrengthinit: No SDIO Drive strength init done for chip 43430 rev 1 pmurev 24
[    7.658348] brcmfmac mmc1:0001:1: Direct firmware load for brcm/brcmfmac43430-sdio.bin failed with error -2
[    7.677131] brcmfmac mmc1:0001:1: Falling back to user helper
[    8.037307] firmware brcm!brcmfmac43430-sdio.bin: firmware_loading_store: map pages failed
[    9.107515] brcmfmac: brcmf_sdio_htclk: HT Avail timeout (1000000): clkctl 0x50
[   10.127546] brcmfmac: brcmf_sdio_htclk: HT Avail timeout (1000000): clkctl 0x50
[   10.168641] usbcore: registered new interface driver brcmfmac
[   12.938793] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup
[   12.954138] device eth0 entered promiscuous mode
[   12.965065] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready
[   16.578449] smsc95xx 1-1.1:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0xDDE1
[   16.594875] br-lan: port 1(eth0) entered forwarding state
[   16.605113] br-lan: port 1(eth0) entered forwarding state
[   16.615677] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
[   18.597027] br-lan: port 1(eth0) entered forwarding state
[   19.695758] random: nonblocking pool is initialized
[  186.328779] smsc95xx 1-1.1:1.0 eth0: link down
[  186.337673] br-lan: port 1(eth0) entered disabled state
[  252.602364] smsc95xx 1-1.1:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0xDDE1
[  252.619006] br-lan: port 1(eth0) entered forwarding state
[  252.629209] br-lan: port 1(eth0) entered forwarding state
[  254.627026] br-lan: port 1(eth0) entered forwarding state

logread
Sun Mar 20 18:52:37 2016 kern.warn kernel: [    1.772392] FIQ FSM acceleration enabled for :
Sun Mar 20 18:52:37 2016 kern.warn kernel: [    1.772392] Non-periodic Split Transactions
Sun Mar 20 18:52:37 2016 kern.warn kernel: [    1.772392] Periodic Split Transactions
Sun Mar 20 18:52:37 2016 kern.warn kernel: [    1.772392] High-Speed Isochronous Endpoints
Sun Mar 20 18:52:37 2016 kern.debug kernel: [    1.804180] dwc_otg: Microframe scheduler enabled
Sun Mar 20 18:52:37 2016 kern.warn kernel: [    1.804229] WARN::hcd_init_fiq:413: FIQ on core 1 at 0x802965a4
Sun Mar 20 18:52:37 2016 kern.warn kernel: [    1.814999] WARN::hcd_init_fiq:414: FIQ ASM at 0x8000ee78 length 36
Sun Mar 20 18:52:37 2016 kern.warn kernel: [    1.826330] WARN::hcd_init_fiq:439: MPHI regs_base at 0xbb87e000
Sun Mar 20 18:52:37 2016 kern.info kernel: [    1.837287] dwc_otg 3f980000.usb: DWC OTG Controller
Sun Mar 20 18:52:37 2016 kern.info kernel: [    1.846516] dwc_otg 3f980000.usb: new USB bus registered, assigned bus number 1
Sun Mar 20 18:52:37 2016 kern.info kernel: [    1.859577] dwc_otg 3f980000.usb: irq 62, io mem 0x00000000
Sun Mar 20 18:52:37 2016 kern.warn kernel: [    1.869805] Init: Port Power? op_state=1
Sun Mar 20 18:52:37 2016 kern.warn kernel: [    1.877290] Init: Power Port (0)
Sun Mar 20 18:52:37 2016 kern.info kernel: [    1.883802] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
Sun Mar 20 18:52:37 2016 kern.info kernel: [    1.895981] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Sun Mar 20 18:52:37 2016 kern.info kernel: [    1.908858] usb usb1: Product: DWC OTG Controller
Sun Mar 20 18:52:37 2016 kern.info kernel: [    1.917623] usb usb1: Manufacturer: Linux 4.4.6 dwc_otg_hcd
Sun Mar 20 18:52:37 2016 kern.info kernel: [    1.927795] usb usb1: SerialNumber: 3f980000.usb
Sun Mar 20 18:52:37 2016 kern.info kernel: [    1.936958] hub 1-0:1.0: USB hub found
Sun Mar 20 18:52:37 2016 kern.info kernel: [    1.944176] hub 1-0:1.0: 1 port detected
Sun Mar 20 18:52:37 2016 kern.debug kernel: [    1.952091] dwc_otg: FIQ enabled
Sun Mar 20 18:52:37 2016 kern.debug kernel: [    1.952099] dwc_otg: NAK holdoff enabled
Sun Mar 20 18:52:37 2016 kern.debug kernel: [    1.952106] dwc_otg: FIQ split-transaction FSM enabled
Sun Mar 20 18:52:37 2016 kern.debug kernel: [    1.952135] Module dwc_common_port init
Sun Mar 20 18:52:37 2016 kern.info kernel: [    1.952299] usbcore: registered new interface driver uas
Sun Mar 20 18:52:37 2016 kern.info kernel: [    1.962065] usbcore: registered new interface driver usb-storage
Sun Mar 20 18:52:37 2016 kern.info kernel: [    1.972959] mousedev: PS/2 mouse device common for all mice
Sun Mar 20 18:52:37 2016 kern.info kernel: [    1.983817] bcm2835-wdt 3f100000.watchdog: Broadcom BCM2835 watchdog timer
Sun Mar 20 18:52:37 2016 kern.info kernel: [    1.996205] sdhci: Secure Digital Host Controller Interface driver
Sun Mar 20 18:52:37 2016 kern.info kernel: [    2.007358] sdhci: Copyright(c) Pierre Ossman
Sun Mar 20 18:52:37 2016 kern.info kernel: [    2.007632] sdhost: log_buf @ ba413000 (fa413000)
Sun Mar 20 18:52:37 2016 kern.info kernel: [    2.087043] mmc0: sdhost-bcm2835 loaded - DMA enabled (>1)
Sun Mar 20 18:52:37 2016 kern.info kernel: [    2.099271] mmc-bcm2835 3f300000.mmc: mmc_debug:0 mmc_debug2:0
Sun Mar 20 18:52:37 2016 kern.info kernel: [    2.109857] mmc-bcm2835 3f300000.mmc: DMA channel allocated
Sun Mar 20 18:52:37 2016 kern.warn kernel: [    2.147166] Indeed it is in host mode hprt0 = 00021501
Sun Mar 20 18:52:37 2016 kern.warn kernel: [    2.147781] mmc0: host does not support reading read-only switch, assuming write-enable
Sun Mar 20 18:52:37 2016 kern.info kernel: [    2.150545] mmc0: new high speed SDHC card at address 0001
Sun Mar 20 18:52:37 2016 kern.info kernel: [    2.157116] sdhci-pltfm: SDHCI platform and OF driver helper
Sun Mar 20 18:52:37 2016 kern.info kernel: [    2.158785] NET: Registered protocol family 10
Sun Mar 20 18:52:37 2016 kern.info kernel: [    2.159484] mmcblk0: mmc0:0001 SD16G 14.6 GiB 
Sun Mar 20 18:52:37 2016 kern.info kernel: [    2.159665] NET: Registered protocol family 17
Sun Mar 20 18:52:37 2016 kern.info kernel: [    2.159717] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
Sun Mar 20 18:52:37 2016 kern.info kernel: [    2.159728] 8021q: 802.1Q VLAN Support v1.8
Sun Mar 20 18:52:37 2016 kern.notice kernel: [    2.160178] Registering SWP/SWPB emulation handler
Sun Mar 20 18:52:37 2016 kern.info kernel: [    2.160764] vc-sm: Videocore shared memory driver
Sun Mar 20 18:52:37 2016 kern.info kernel: [    2.160771] [vc_sm_connected_init]: start
Sun Mar 20 18:52:37 2016 kern.info kernel: [    2.161152]  mmcblk0: p1 p2
Sun Mar 20 18:52:37 2016 kern.info kernel: [    2.161191] [vc_sm_connected_init]: end - returning 0
Sun Mar 20 18:52:37 2016 kern.info kernel: [    2.164271] 3f201000.uart: ttyAMA0 at MMIO 0x3f201000 (irq = 87, base_baud = 0) is a PL011 rev2
Sun Mar 20 18:52:37 2016 kern.warn kernel: [    2.180390] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
Sun Mar 20 18:52:37 2016 kern.warn kernel: [    2.181913] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
Sun Mar 20 18:52:37 2016 kern.warn kernel: [    2.183436] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
Sun Mar 20 18:52:37 2016 kern.warn kernel: [    2.186169] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
Sun Mar 20 18:52:37 2016 kern.info kernel: [    2.274039] mmc1: new high speed SDIO card at address 0001
Sun Mar 20 18:52:37 2016 kern.info kernel: [    2.360901] EXT4-fs (mmcblk0p2): mounted filesystem without journal. Opts: (null)
Sun Mar 20 18:52:37 2016 kern.info kernel: [    2.375309] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
Sun Mar 20 18:52:37 2016 kern.info kernel: [    2.387825] Freeing unused kernel memory: 220K (8053d000 - 80574000)
Sun Mar 20 18:52:37 2016 user.info kernel: [    2.500365] init: Console is alive
Sun Mar 20 18:52:37 2016 user.info kernel: [    2.507261] init: - watchdog -
Sun Mar 20 18:52:37 2016 kern.info kernel: [    2.527067] usb 1-1: new high-speed USB device number 2 using dwc_otg
Sun Mar 20 18:52:37 2016 kern.warn kernel: [    2.538819] Indeed it is in host mode hprt0 = 00001101
Sun Mar 20 18:52:37 2016 user.info kernel: [    2.715195] init: - preinit -
Sun Mar 20 18:52:37 2016 kern.info kernel: [    2.747348] usb 1-1: New USB device found, idVendor=0424, idProduct=9514
Sun Mar 20 18:52:37 2016 kern.info kernel: [    2.759473] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
Sun Mar 20 18:52:37 2016 kern.info kernel: [    2.773196] hub 1-1:1.0: USB hub found
Sun Mar 20 18:52:37 2016 kern.notice kernel: [    2.774088] random: procd urandom read with 45 bits of entropy available
Sun Mar 20 18:52:37 2016 kern.info kernel: [    2.793011] hub 1-1:1.0: 5 ports detected
Sun Mar 20 18:52:37 2016 kern.info kernel: [    3.077050] usb 1-1.1: new high-speed USB device number 3 using dwc_otg
Sun Mar 20 18:52:37 2016 kern.info kernel: [    3.187247] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00
Sun Mar 20 18:52:37 2016 kern.info kernel: [    3.199740] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
Sun Mar 20 18:52:37 2016 kern.info kernel: [    3.215664] smsc95xx v1.0.4
Sun Mar 20 18:52:37 2016 kern.info kernel: [    3.279928] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-3f980000.usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:b8:af:6e
Sun Mar 20 18:52:37 2016 user.notice kernel: [    5.850781] mount_root: mounting /dev/root
Sun Mar 20 18:52:37 2016 kern.warn kernel: [    5.859304] EXT4-fs (mmcblk0p2): warning: mounting unchecked fs, running e2fsck is recommended
Sun Mar 20 18:52:37 2016 kern.info kernel: [    5.878206] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
Sun Mar 20 18:52:37 2016 user.info kernel: [    5.947164] procd: - early -
Sun Mar 20 18:52:37 2016 user.info kernel: [    5.953273] procd: - watchdog -
Sun Mar 20 18:52:37 2016 user.info kernel: [    6.573013] procd: - ubus -
Sun Mar 20 18:52:37 2016 user.info kernel: [    6.631080] procd: - init -
Sun Mar 20 18:52:37 2016 kern.info kernel: [    7.169871] NET: Registered protocol family 8
Sun Mar 20 18:52:37 2016 kern.info kernel: [    7.178248] NET: Registered protocol family 20
Sun Mar 20 18:52:37 2016 kern.info kernel: [    7.202702] tun: Universal TUN/TAP device driver, 1.6
Sun Mar 20 18:52:37 2016 kern.info kernel: [    7.212280] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
Sun Mar 20 18:52:37 2016 kern.info kernel: [    7.228540] l2tp_core: L2TP core driver, V2.0
Sun Mar 20 18:52:37 2016 kern.info kernel: [    7.237942] l2tp_netlink: L2TP netlink interface
Sun Mar 20 18:52:37 2016 kern.info kernel: [    7.249970] gre: GRE over IPv4 demultiplexor driver
Sun Mar 20 18:52:37 2016 kern.info kernel: [    7.260165] ip_gre: GRE over IPv4 tunneling driver
Sun Mar 20 18:52:37 2016 kern.info kernel: [    7.273984] PPP generic driver version 2.4.2
Sun Mar 20 18:52:37 2016 kern.info kernel: [    7.286574] ip6_tables: (C) 2000-2006 Netfilter Core Team
Sun Mar 20 18:52:37 2016 kern.info kernel: [    7.306383] hidraw: raw HID events driver (C) Jiri Kosina
Sun Mar 20 18:52:37 2016 kern.info kernel: [    7.337423] Loading modules backported from Linux version v4.4-rc5-1913-gc8fdf68
Sun Mar 20 18:52:37 2016 kern.info kernel: [    7.351625] Backport generated by backports.git backports-20151218-0-g2f58d9d
Sun Mar 20 18:52:37 2016 kern.info kernel: [    7.366497] ip_tables: (C) 2000-2006 Netfilter Core Team
Sun Mar 20 18:52:37 2016 kern.info kernel: [    7.382222] nf_conntrack version 0.5.0 (14877 buckets, 59508 max)
Sun Mar 20 18:52:37 2016 kern.info kernel: [    7.529986] PPP MPPE Compression module registered
Sun Mar 20 18:52:37 2016 kern.info kernel: [    7.543193] NET: Registered protocol family 24
Sun Mar 20 18:52:37 2016 kern.info kernel: [    7.557049] PPTP driver version 0.8.5
Sun Mar 20 18:52:37 2016 kern.info kernel: [    7.566443] usbcore: registered new interface driver usbhid
Sun Mar 20 18:52:37 2016 kern.info kernel: [    7.576766] usbhid: USB HID core driver
Sun Mar 20 18:52:37 2016 kern.info kernel: [    7.591920] xt_time: kernel timezone is -0000
Sun Mar 20 18:52:37 2016 kern.info kernel: [    7.613972] l2tp_ppp: PPPoL2TP kernel driver, V2.0
Sun Mar 20 18:52:37 2016 kern.err kernel: [    7.636619] brcmfmac: brcmf_sdio_drivestrengthinit: No SDIO Drive strength init done for chip 43430 rev 1 pmurev 24
Sun Mar 20 18:52:37 2016 kern.warn kernel: [    7.658348] brcmfmac mmc1:0001:1: Direct firmware load for brcm/brcmfmac43430-sdio.bin failed with error -2
Sun Mar 20 18:52:37 2016 kern.warn kernel: [    7.677131] brcmfmac mmc1:0001:1: Falling back to user helper
Sun Mar 20 18:52:37 2016 kern.err kernel: [    8.037307] firmware brcm!brcmfmac43430-sdio.bin: firmware_loading_store: map pages failed
Sun Mar 20 18:52:37 2016 kern.err kernel: [    9.107515] brcmfmac: brcmf_sdio_htclk: HT Avail timeout (1000000): clkctl 0x50
Sun Mar 20 18:52:37 2016 kern.err kernel: [   10.127546] brcmfmac: brcmf_sdio_htclk: HT Avail timeout (1000000): clkctl 0x50
Sun Mar 20 18:52:37 2016 kern.info kernel: [   10.168641] usbcore: registered new interface driver brcmfmac
Sun Mar 20 18:52:37 2016 authpriv.info dropbear[768]: Not backgrounding
Sun Mar 20 18:52:38 2016 kern.info kernel: [   12.938793] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup
Sun Mar 20 18:52:38 2016 kern.info kernel: [   12.954138] device eth0 entered promiscuous mode
Sun Mar 20 18:52:38 2016 kern.info kernel: [   12.965065] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready
Sun Mar 20 18:52:38 2016 daemon.notice netifd: Interface 'lan' is enabled
Sun Mar 20 18:52:38 2016 daemon.notice netifd: Interface 'lan' is setting up now
Sun Mar 20 18:52:38 2016 daemon.notice netifd: Interface 'lan' is now up
Sun Mar 20 18:52:38 2016 daemon.notice netifd: Interface 'loopback' is enabled
Sun Mar 20 18:52:38 2016 daemon.notice netifd: Interface 'loopback' is setting up now
Sun Mar 20 18:52:38 2016 daemon.notice netifd: Interface 'loopback' is now up
Sun Mar 20 18:52:38 2016 daemon.notice netifd: Network device 'lo' link is up
Sun Mar 20 18:52:38 2016 daemon.notice netifd: Interface 'loopback' has link connectivity 
Sun Mar 20 18:52:38 2016 user.notice firewall: Reloading firewall due to ifup of lan (br-lan)
Sun Mar 20 18:52:39 2016 daemon.info procd: - init complete -
Sun Mar 20 18:52:42 2016 kern.info kernel: [   16.578449] smsc95xx 1-1.1:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0xDDE1
Sun Mar 20 18:52:42 2016 kern.info kernel: [   16.594875] br-lan: port 1(eth0) entered forwarding state
Sun Mar 20 18:52:42 2016 kern.info kernel: [   16.605113] br-lan: port 1(eth0) entered forwarding state
Sun Mar 20 18:52:42 2016 daemon.notice netifd: Network device 'eth0' link is up
Sun Mar 20 18:52:42 2016 kern.info kernel: [   16.615677] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
Sun Mar 20 18:52:42 2016 daemon.notice netifd: Bridge 'br-lan' link is up
Sun Mar 20 18:52:42 2016 daemon.notice netifd: Interface 'lan' has link connectivity 
Sun Mar 20 18:52:42 2016 daemon.warn odhcpd[730]: DHCPV6 SOLICIT IA_NA from 000100011d7495653085a92c9361 on br-lan: ok fd04:9cc2:2fdb::7fa/128 
Sun Mar 20 18:52:43 2016 daemon.warn odhcpd[730]: DHCPV6 SOLICIT IA_NA from 000100011d7495653085a92c9361 on br-lan: ok fd04:9cc2:2fdb::7fa/128 
Sun Mar 20 18:52:44 2016 kern.info kernel: [   18.597027] br-lan: port 1(eth0) entered forwarding state
Sun Mar 20 18:52:45 2016 daemon.warn odhcpd[730]: DHCPV6 SOLICIT IA_NA from 000100011d7495653085a92c9361 on br-lan: ok fd04:9cc2:2fdb::7fa/128 
Sun Mar 20 18:52:45 2016 daemon.warn odhcpd[730]: DHCPV6 REQUEST IA_NA from 000100011d7495653085a92c9361 on br-lan: ok fd04:9cc2:2fdb::7fa/128 
Sun Mar 20 18:52:45 2016 kern.notice kernel: [   19.695758] random: nonblocking pool is initialized
Sun Mar 20 18:53:02 2016 daemon.info dnsmasq[971]: started, version 2.75 cachesize 150
Sun Mar 20 18:53:02 2016 daemon.info dnsmasq[971]: compile time options: IPv6 GNU-getopt no-DBus no-i18n no-IDN DHCP no-DHCPv6 no-Lua TFTP no-conntrack no-ipset no-auth no-DNSSEC loop-detect inotify
Sun Mar 20 18:53:02 2016 daemon.info dnsmasq[971]: DNS service limited to local subnets
Sun Mar 20 18:53:02 2016 daemon.info dnsmasq-dhcp[971]: DHCP, IP range 192.168.1.100 -- 192.168.1.249, lease time 12h
Sun Mar 20 18:53:02 2016 daemon.info dnsmasq[971]: using local addresses only for domain lan
Sun Mar 20 18:53:02 2016 daemon.warn dnsmasq[971]: no servers found in /tmp/resolv.conf.auto, will retry
Sun Mar 20 18:53:02 2016 daemon.info dnsmasq[971]: read /etc/hosts - 4 addresses
Sun Mar 20 18:53:02 2016 daemon.info dnsmasq[971]: read /tmp/hosts/dhcp - 2 addresses
Sun Mar 20 18:53:02 2016 daemon.info dnsmasq-dhcp[971]: read /etc/ethers - 0 addresses
Sun Mar 20 18:53:12 2016 daemon.warn odhcpd[730]: DHCPV6 SOLICIT IA_NA from 000100011d7495653085a92c9361 on br-lan: ok fd04:9cc2:2fdb::7fa/128 
Sun Mar 20 18:53:12 2016 daemon.warn odhcpd[730]: DHCPV6 REQUEST IA_NA from 000100011d7495653085a92c9361 on br-lan: ok fd04:9cc2:2fdb::7fa/128 
Sun Mar 20 18:53:12 2016 daemon.info dnsmasq[971]: read /etc/hosts - 4 addresses
Sun Mar 20 18:53:12 2016 daemon.info dnsmasq[971]: read /tmp/hosts/odhcpd - 1 addresses
Sun Mar 20 18:53:12 2016 daemon.info dnsmasq[971]: read /tmp/hosts/dhcp - 2 addresses
Sun Mar 20 18:53:12 2016 daemon.info dnsmasq-dhcp[971]: read /etc/ethers - 0 addresses
Sun Mar 20 18:53:12 2016 daemon.info dnsmasq[971]: read /etc/hosts - 4 addresses
Sun Mar 20 18:53:12 2016 daemon.info dnsmasq[971]: read /tmp/hosts/odhcpd - 1 addresses
Sun Mar 20 18:53:12 2016 daemon.info dnsmasq[971]: read /tmp/hosts/dhcp - 2 addresses
Sun Mar 20 18:53:12 2016 daemon.info dnsmasq-dhcp[971]: read /etc/ethers - 0 addresses
Sun Mar 20 18:53:14 2016 daemon.info dnsmasq-dhcp[971]: DHCPDISCOVER(br-lan) 192.168.1.107 30:85:a9:2c:93:61 
Sun Mar 20 18:53:14 2016 daemon.info dnsmasq-dhcp[971]: DHCPOFFER(br-lan) 192.168.1.107 30:85:a9:2c:93:61 
Sun Mar 20 18:53:14 2016 daemon.info dnsmasq-dhcp[971]: DHCPREQUEST(br-lan) 192.168.1.107 30:85:a9:2c:93:61 
Sun Mar 20 18:53:14 2016 daemon.info dnsmasq-dhcp[971]: DHCPACK(br-lan) 192.168.1.107 30:85:a9:2c:93:61 marcincomp
Sun Mar 20 18:53:15 2016 authpriv.info dropbear[1022]: Child connection from 192.168.1.107:53661
Sun Mar 20 18:53:22 2016 authpriv.notice dropbear[1022]: Password auth succeeded for 'root' from 192.168.1.107:53661
Sun Mar 20 18:55:32 2016 kern.info kernel: [  186.328779] smsc95xx 1-1.1:1.0 eth0: link down
Sun Mar 20 18:55:32 2016 kern.info kernel: [  186.337673] br-lan: port 1(eth0) entered disabled state
Sun Mar 20 18:55:32 2016 daemon.notice netifd: Network device 'eth0' link is down
Sun Mar 20 18:55:33 2016 daemon.notice netifd: Bridge 'br-lan' link is down
Sun Mar 20 18:55:33 2016 daemon.notice netifd: Interface 'lan' has link connectivity loss
Sun Mar 20 18:56:38 2016 kern.info kernel: [  252.602364] smsc95xx 1-1.1:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0xDDE1
Sun Mar 20 18:56:38 2016 daemon.notice netifd: Network device 'eth0' link is up
Sun Mar 20 18:56:38 2016 kern.info kernel: [  252.619006] br-lan: port 1(eth0) entered forwarding state
Sun Mar 20 18:56:38 2016 kern.info kernel: [  252.629209] br-lan: port 1(eth0) entered forwarding state
Sun Mar 20 18:56:38 2016 daemon.notice netifd: Bridge 'br-lan' link is up
Sun Mar 20 18:56:38 2016 daemon.notice netifd: Interface 'lan' has link connectivity 
Sun Mar 20 18:56:38 2016 daemon.info dnsmasq-dhcp[971]: DHCPREQUEST(br-lan) 192.168.1.107 30:85:a9:2c:93:61 
Sun Mar 20 18:56:38 2016 daemon.info dnsmasq-dhcp[971]: DHCPACK(br-lan) 192.168.1.107 30:85:a9:2c:93:61 marcincomp
Sun Mar 20 18:56:38 2016 daemon.warn odhcpd[730]: DHCPV6 SOLICIT IA_NA from 000100011d7495653085a92c9361 on br-lan: ok fd04:9cc2:2fdb::7fa/128 
Sun Mar 20 18:56:38 2016 daemon.info dnsmasq[971]: read /etc/hosts - 4 addresses
Sun Mar 20 18:56:38 2016 daemon.info dnsmasq[971]: read /tmp/hosts/odhcpd - 0 addresses
Sun Mar 20 18:56:38 2016 daemon.info dnsmasq[971]: read /tmp/hosts/dhcp - 2 addresses
Sun Mar 20 18:56:38 2016 daemon.info dnsmasq-dhcp[971]: read /etc/ethers - 0 addresses
Sun Mar 20 18:56:38 2016 daemon.warn odhcpd[730]: DHCPV6 SOLICIT IA_NA from 000100011d7495653085a92c9361 on br-lan: ok fd04:9cc2:2fdb::7fa/128 
Sun Mar 20 18:56:39 2016 daemon.warn odhcpd[730]: DHCPV6 REQUEST IA_NA from 000100011d7495653085a92c9361 on br-lan: ok fd04:9cc2:2fdb::7fa/128 
Sun Mar 20 18:56:39 2016 daemon.info dnsmasq[971]: read /etc/hosts - 4 addresses
Sun Mar 20 18:56:39 2016 daemon.info dnsmasq[971]: read /tmp/hosts/odhcpd - 1 addresses
Sun Mar 20 18:56:39 2016 daemon.info dnsmasq[971]: read /tmp/hosts/dhcp - 2 addresses
Sun Mar 20 18:56:39 2016 daemon.info dnsmasq-dhcp[971]: read /etc/ethers - 0 addresses
Sun Mar 20 18:56:40 2016 kern.info kernel: [  254.627026] br-lan: port 1(eth0) entered forwarding state

Post #8

Zajec

22 Mar 2016, 08:59

Well, there you go:

marcin.kasinski wrote:

[    7.658348] brcmfmac mmc1:0001:1: Direct firmware load for brcm/brcmfmac43430-sdio.bin failed with error -2
[    7.677131] brcmfmac mmc1:0001:1: Falling back to user helper
[    8.037307] firmware brcm!brcmfmac43430-sdio.bin: firmware_loading_store: map pages failed
[    9.107515] brcmfmac: brcmf_sdio_htclk: HT Avail timeout (1000000): clkctl 0x50
[   10.127546] brcmfmac: brcmf_sdio_htclk: HT Avail timeout (1000000): clkctl 0x50

Broadcom didn't add 43430 firmware to linux-firmware git repo, so you need to find it in some unofficial place.

Also, please start using CODE forum tag for putting logs (I edited all your posts).

Post #9

marcin.kasinski

22 Mar 2016, 19:22

Thank you for your help.

Now it works fine.

Post #10

cmsigler

22 Mar 2016, 19:24

At first I gathered some incorrect info -- this should be a workable solution. On the wiki page:

https://wiki.openwrt.org/doc/hardware/s … om.bcm47xx

it says to use opkg to install kmod-brcmfmac. For Chaos Calmer see:

https://downloads.openwrt.org/chaos_cal … ages/base/

so the package name is correct. Trunk is different. See:

https://downloads.openwrt.org/snapshots … ages/base/

so the package to install is called brcmfmac-firmware-sdio, etc. HTH.

Clemmitt

Post #11

Zajec

22 Mar 2016, 19:42

cmsigler wrote:

At first I gathered some incorrect info -- this should be a workable solution. On the wiki page:
https://wiki.openwrt.org/doc/hardware/s … om.bcm47xx
it says to use opkg to install kmod-brcmfmac. For Chaos Calmer see:
https://downloads.openwrt.org/chaos_cal … ages/base/
so the package name is correct. Trunk is different. See:
https://downloads.openwrt.org/snapshots … ages/base/
so the package to install is called brcmfmac-firmware-sdio, etc. HTH.

In 15.05(.1) we got one package for driver (.ko module) and firmware. In trunk we have separated packages for driver (.ko module) and firmwares (.bin files). So when using trunk you need kmod-brcmfmac and some of brcmfmac-firmware-* packages.

Post #12

windyoung

30 Apr 2016, 11:48

Hi @marcin.kasinski, can you send me your build of openwrt-brcm2708-bcm2710-rpi-3-ext4-sdcard.img?

Post #13

pronoy

2 May 2016, 17:35

Hi @marcin.kasinski, could you please share the kernel .config file for rasp pi 3....

Post #14

marcin.kasinski

2 May 2016, 22:34

Hi.

My config file is just standard conf file based on RPI 3 profile.

It is nothing special.

Additional thing I did was copying brcmfmac43430-sdio.bin and brcmfmac43430-sdio.txt.

Without these files there was no wifi.

Post #15

SharkAttack99

26 Jun 2016, 17:55

It appears as if root is first mounted read-only and then re-mounted as read-write. I built from the latest trunk using the default Pi 3 config and only have the initial read-only mount. Any idea how/why the re-mount occurs?

[    2.360901] EXT4-fs (mmcblk0p2): mounted filesystem without journal. Opts: (null)
[    2.375309] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.

[    5.850781] mount_root: mounting /dev/root
[    5.859304] EXT4-fs (mmcblk0p2): warning: mounting unchecked fs, running e2fsck is recommended
[    5.878206] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)

The discussion might have continued from here.

Page 1 of 1