hello,
few days ago i tried to flash a openwrt firmware, but something went wrong and my router is bricked.
i connected through serial and tried to flash via tftp, but by pc can't reach the router
i run printenv on router to check the ip
router ip: 192.168.1.10
server ip (my pc): 192.168.1.169
active eth: eth0

i set 192.168.1.169 on my pc with /24 mask and inserted the eth cable from my pc in router ports, but i cant ping 192.168.1.10 (tried wan lan1 lan2 lan3 lan4)
this means i cannot download the firmware via tftp

when i insert the cable into the router, the corresponding port led is blinking, meaning it has activity
pc and router are connected directly (no firewall / windows firewall is also disabled)

can anyone help with this issue?