Hello,
I am trying to install a local build into a ZBT-WG2626 using kermit over serial.
I have built both openwrt-ramips-mt7621-zbt-wg2626-initramfs-kernel.bin and
openwrt-ramips-7621-zbt-wg2626-squashfs-sysupgrade.bin.
tftp does not seem to work on my bootloader, hence trying kermit over serial.
I am typing loadb 0x80000000
then send via kermit, that seems to work
then I type go 0x80000000
Then it just locks up.
Hoping to run from ram before I update it permanently!
Thank you,
Mike