hummer93 wrote:As it turned out, there is not enough space left, so i want to try to build a new image with luci.
I ran into the exact same problem.
hummer93 wrote:(can i use the v2 openwrt firmware as the base ?)
I tried that and it didn't work.
hummer93 wrote:My question now is, which trunk version should i use.
I'm new around here, but if I understand what's going on, you can't use trunk b/c v3 was added to the tree after the last trunk release. I used Image Builder from yesterday's snapshot to build an image that included luci.
https://wiki.openwrt.org/doc/howto/obta … e.generate
If you're interested, my command was:
make image PROFILE=TLWA801 PACKAGES="luci -ip6tables -ppp -ppp-mod-pppoe -odhcp6c"
That made an image that includes luci and fits just fine on the hardware. This includes luci and removes ppp and some ipv6 support (which I don't need.) I was able to install and use that image. It works perfect for my intentions (wifi access point with sandboxed guest network.)
You can use my image if you like:
https://drive.google.com/file/d/0B-0yWV … sp=sharing
https://drive.google.com/file/d/0B-0yWV … sp=sharing