Hi,
I currently try to configure my Trunk x86 Router with uHTTPd to listen only on the lan port on both IPv4 and IPv6.
Documentation say
"80" -> then listen on ALL interfaces on port 80
0.0.0.0:80 -> Only IPv4 on ALL Interfaces
[::]:80 -> Only IPv6 an ALL interfaces
192.168.1.1:80 -> Only IPv4 on Interface with given address
[fe80:....:1] -> Only IPv6 on Interface with given address
If I configure both 192.168.1.1:80 and a second entry [fe80:....:1]80 in /etc/config/uhttpd, only the first parameter
is recognised and uHTTPd started listening on this IPv4 or IPv6. Never both protocols.
For security reasons I only want access to on interface.
Thanks for your support
Christian