For my post #106:
ad2.) - probably fixed - actually not a problem - tested and working fine (usb3) without uPD72020x-firmware (saving /etc/config/fstab and eq. config to usb modem from image/firmware with uPD72020x-firmware - external and pre-release LEDE git: https://github.com/chunkeey/apm82181-lede ).
New problem is /lib/firmware/pci_wmac0(1).eeprom - loading with error and probably not working perfectly: using full wpad,hostapd-utils,wireless-tools,etc and using functions "WPS pushbutton" - button and connect to this functions/methods working fine - of course LED's from this functions/button not working.
EDIT:
re-ad2.)
But after a power outage throughout the house and then on router start (bootlog) device reports a problem with a non-existent firmware K2013080.mem package uPD72020x-firmware_1_powerpc_464fp.ipk - oddly enough I had it compiled as a package and after the installation of the same package with the firmware, it is not the new firmware recognized by the system when the system boot time.
EDIT II:
re-ad2.)
Only helps embedding firmware K2013080.mem the installation image - what strange firmware is the same size as the one that installation separately from the package (the same file content - checked hexeditor).
CONCLUSIONS:
1) Firmware for usb3 must be compiled along with the installation image to the router with an external git https://github.com/chunkeey/renesas-fw - then usb3 working properly.
2) The installation of firmware to usb3 package does not help - then usb3 not work at all.
*Tested LEDE Reboot r1442 / LUCIE Master (git-16.237.78341-d5f8c9b).
(Last edited by build000 on 26 Aug 2016, 11:42)