POST(1),Pattern:0xa5a5a5a5 => PASS

POST(2),Pattern:0x5a5a5a5a => PASS


mfid=1 devid=2249
Found 1 x 2M flash memory

---RealTek(RTL8196B-kld)at 2010.12.30-16:45+0900 version v1.7.2 Alpha [16bit](330MHz)
boot for Flag is 618 0
Jump to image start=0x80500000...
decompressing kernel:
Uncompressing Linux... done, booting the kernel.
done decompressing kernel.
Realtek GPIO Driver for Flash Reload Default is 618 0
RTL8192SE driver version 1.31 (2011-01-19)
init started:  BusyBox v1.01 (2006.10.02-08:16+0000) multi-call binary
Starting pid 9, console /dev/ttyS0: '/bin/sh'


BusyBox v1.01 (2006.10.02-08:16+0000) Built-in shell (msh)
Enter 'help' for a list of built-in commands.

mount: Mounting /dev/mtdblock2 on /web-lang failed: Invalid argument
Initialize wlan0 interface
set 618 wlan
mac_filter intVal =0
set 618 wlan channel
Initialize wlan0-va0 interface
SIOCGIFFLAGS: No such device
bridge br0 doesn't exist; can't delete it
Setup bridge...
route: SIOC[ADD|DEL]RT: No such process
route: SIOC[ADD|DEL]RT: No such process
route: SIOC[ADD|DEL]RT: No such process
route: SIOC[ADD|DEL]RT: No such process
route: SIOC[ADD|DEL]RT: No such process
route: SIOC[ADD|DEL]RT: No such process
route: SIOC[ADD|DEL]RT: No such process
route: SIOC[ADD|DEL]RT: No such process
route: SIOC[ADD|DEL]RT: No such process
IEEE 802.1x (WPA) daemon, version 1.8e
test wps
killall: netbios: no process killed
killall: llmnresp: no process killed
Start telnetd ...
0DevInfo.txt text mode!
hard ver isA1
boa: server version Boa/0.94.14rc21
boa: server built Jan 26 2011 at 15:53:02.
boa: starting server pid=787, port 80