OpenWrt Forum Archive

Topic: OpenWrt build for router 3Com 3CRWER100-75

The content of this topic has been archived on 29 Apr 2018. There are no obvious gaps in this topic, but there may still be some posts missing at the end.

Hi!

I built OpenWrt for this router. It has the following features working/tested:

- Built from Attitude Adjustment (trunk)
- 4 switched LAN ports
- Wireless
- WPA2+AES (Preshared key)
- Outgoing NAT
- DHCP server on LAN
- DHCP client on WAN
- DNS relay

The following features are not working/are untested:

- The Wireless LED never lights up
- QoS built but untested
- UPnP built but untested
- It has no web management interface (LuCi failed to build)
- IPv6

It might have something else that I have forgotten to mention (this is my first OpenWrt build, and I have only tested it with my router). If you are interested (these routers are not that bad, but the original 3Com/HP firmware is crap) give my build a shot:

http://gapf.ninth.su/openwrt-atheros-root.squashfs
http://gapf.ninth.su/openwrt-atheros-vmlinux.lzma

Regards and please post your comments/findings in this thread.

The discussion might have continued from here.