Nanostation M2
dear friends, I xm5.6.2 install the software before you install the device , but I did not like , but the unit is running but xm5.5 restarts itself within 3 seconds ..
I logged on and saw the following error with USB - TTL please help .
meanwhile 3rd party software with OpenWRT ddwrt gargoyle like working when I installed the software but I made changes in off the device does not record that opened the resetting a setting ..
I do not know what I should do!
We're guaranteed to have opened to outside of the device.
Starting kernel ...
Booting...
[ 0.137000] Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(31,3)
[ 0.145000] Rebooting in 3 seconds..
xm.5.6.2
## Booting image at 9f050000 ...
Image Name: MIPS Ubiquiti Linux-2.6.32.67
Created: 2015-09-02 16:53:50 UTC
Image Type: MIPS Linux Kernel Image (lzma compressed)
Data Size: 1004933 Bytes = 981.4 kB
Load Address: 80002000
Entry Point: 80002000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
Starting kernel ...
Booting...
[ 0.137000] Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(31,3)
[ 0.145000] Rebooting in 3 seconds..
How can I fix this error.
-----------------------------------
Setting default IP 192.168.1.20
Starting TFTP server...
Using eth0 (192.168.1.20), address: 0x81000000
Waiting for connection: -
Receiving file from 192.168.1.254:64662
Received 7247076 bytes
Firmware Version: XM.ar7240.v5.6-beta.21238.140225.1050
Setting U-Boot environment variables
Un-Protected 1 sectors
Erasing Flash.... done
Erased 1 sectors
Writing to Flash... done
Protected 1 sectors
Will not overwrite u-boot partition! Skipped.
Copying partition 'kernel' to flash memory:
First 0x5 last 0x14 sector size 0x10000
................ done
write addr: 9f050000
Copying partition 'rootfs' to flash memory:
First 0x15 last 0x7a sector size 0x10000
...................................................................................................... done
write addr: 9f150000
Firmware update complete.
Resetting...
ar7240> boot
## Booting image at 9f050000 ...
Image Name: MIPS Ubiquiti Linux-2.6.32.61
Created: 2014-02-25 8:51:04 UTC
Image Type: MIPS Linux Kernel Image (lzma compressed)
Data Size: 1004222 Bytes = 980.7 kB
Load Address: 80002000
Entry Point: 80002000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
Starting kernel ...
Booting...
...mounts done
...filesystem init done
...base ok
...update ok
...symlinks ok
...httpd ok
...detect ok
...caldata error
Failed to detect board.
ubntconf returned 139
[/sbin/ubnt-caldata -v -w -m -n -s]
Failed to detect board.
ubnt-caldata returned 1
...running /sbin/init
Cannot identify board.
XM.ar7240.v5.6-beta.21238.140225.1050
this firmware update Man Sad cannot identify boar