Hello. I wanted to use the OpenWRT firmware on my router, Edimax 6475nD, because i was unhappy with the original. Firmware update went smooth, but now i simply can't connect to the router anymore. The LED is blinking fast, so i know i'm in failsafe, but there's nothing i can do to connect to it. Here is what i've done:
1. Unplug and power off router
2. Go to IPv4 settings on pc and enter static ip 192.168.1.2 subnet 255.255.255.0 -> Don't confirm yet
3. Power on router
4. When settings LED starts blinking, press reset button
5. When settings LED starts blinking rapidly, connect the ethernet cable from the pc to WAN port and confirm IP settings on pc.
6. Open putty telnet session and connect to 192.168.1.1 port 23

Putty displays an error with Connection timed out. Can anyone help me with this, please? Thank you.
btw, i'm using win 10

(Last edited by raduleo on 28 Aug 2015, 07:57)