Hello everyone,
I'am working on Atheros ap135 evaluation board. I found barrier breaker openwrt for the board at
https://downloads.openwrt.org/barrier_b … x/generic/
I used the following commands to flash openwrt (I have changed the name)
tftp 0x80060000 ap135kernel.bin
erase 0x9f680000 +$filesize
cp.b $fileaddr 0x9f680000 $filesize
tftp 0x80060000 ap135rootfs.bin
erase 0x9f050000 +0x630000
cp.b $fileaddr 0x9f050000 $filesize
reset
After this openwrt was flashed and working but as soon as I restarted the board the openwrt was I got the following message
Booting image at 9f680000...
Bad magic number
Can anyone please help me with this
Thank you
(Last edited by pramod.j94 on 19 May 2015, 06:06)