Is it possible to add an external antenna? I gave a look at the pcb ( i got 2 of these) and i can't find an "usual" wifi antenna design
Topic: Hame A5 and clones, external antenna mod?
The content of this topic has been archived on 22 Apr 2018. There are no obvious gaps in this topic, but there may still be some posts missing at the end.
Please provide those pictures to get help.
That element located top-left of the SoC (C207) seems to be the antenna. But you are right about those two copper pads on the last picture, that is where you should get rid of the smd element and solder on your pigtail. Ground is that larger pad on the bottom.
That element located top-left of the SoC (C207) seems to be the antenna. But you are right about those two copper pads on the last picture, that is where you should get rid of the smd element and solder on your pigtail. Ground is that larger pad on the bottom.
Iwas thinking the same thing, i will build a better antenna and make some tests
The discussion might have continued from here.