Hello,

I'm playing around with OpenWrt for the first time and just want to leave a note for everyone who encounters the same problem.
As you try to connect to the router with an openwrt client ( I didn't test other methods ) you cannot connect to the device unless you set 40Mhz. ( Master running TP-Link Firmware not OpenWrt )

Hope this helps everybody who tries the same and spares some time I wasted.

Goodbye~

Client log with 20Mhz on master produces:

Tue Mar  3 19:32:48 2015 kern.info kernel: [ 4567.730000] wlan0: direct probe to 64:66:b3:a1:aa:5c (try 1/3)
Tue Mar  3 19:32:48 2015 kern.info kernel: [ 4567.950000] wlan0: direct probe to 64:66:b3:a1:aa:5c (try 2/3)
Tue Mar  3 19:32:48 2015 kern.info kernel: [ 4568.160000] wlan0: direct probe to 64:66:b3:a1:aa:5c (try 3/3)
Tue Mar  3 19:32:49 2015 kern.info kernel: [ 4568.370000] wlan0: authentication with 64:66:b3:a1:aa:5c timed out

(Last edited by Letters90 on 3 Mar 2015, 20:41)