Hello,
I would like to set up a native VLAN plus a tagged VLAN on same port. I tried following setup:
insmod switch_core
insmod switch_adm
echo "1t 5t" > /proc/switch/eth0/vlan/10/ports
After that I found out that packets on vlan0 are also tagged on port 1. Is that a bug or a feature ?
An
echo "1* 2 3 4 5t*" > /proc/switch/eth0/vlan/0/ports
yielded in nasty situation that no packets are tagged and after
echo "1t* 2 3 4 5t*" > /proc/switch/eth0/vlan/0/ports
echo "1t 5t" > /proc/switch/eth0/vlan/10/ports
I got all packets tagged again :-(
Is there a method to get VLAN0 packets untagged and VLAN 10 packets tagged on port 1 ?
robocfg does not find any configurable port and seems to be outdated.