When I try to use the os.locale method to set the locale to pt_PT, the return of os.date method remains the same. How do I change locale? Below is my code. I'm trying to do this in the file /usr/lib/lua/luci/view/admin_status/index.htm.
require "luci.fs"
require "luci.tools.status"
local has_ipv6 = luci.fs.access("/proc/net/ipv6_route")
local has_dhcp = luci.fs.access("/etc/config/dhcp")
local has_wifi = luci.fs.stat("/etc/config/wireless")
has_wifi = has_wifi and has_wifi.size > 0
if luci.http.formvalue("status") == "1" then
os.setlocale("pt_PT")
local ntm = require "luci.model.network".init()
local wan = ntm:get_wannet()
local wan6 = ntm:get_wan6net()
local _, _, memtotal, memcached, membuffers, memfree = luci.sys.sysinfo()
local conn_count = tonumber((
luci.sys.exec("wc -l /proc/net/nf_conntrack") or
luci.sys.exec("wc -l /proc/net/ip_conntrack") or
""):match("%d+")) or 0
local conn_max = tonumber((
luci.sys.exec("sysctl net.nf_conntrack_max") or
luci.sys.exec("sysctl net.ipv4.netfilter.ip_conntrack_max") or
""):match("%d+")) or 4096
local rv = {
uptime = luci.sys.uptime(),
localtime = os.date(),
loadavg = { luci.sys.loadavg() },
memtotal = memtotal,
memcached = memcached,
membuffers = membuffers,
memfree = memfree,
connmax = conn_max,
conncount = conn_count,
leases = luci.tools.status.dhcp_leases(),
leases6 = luci.tools.status.dhcp6_leases(),
wifinets = luci.tools.status.wifi_networks()
}
if wan then
rv.wan = {
ipaddr = wan:ipaddr(),
gwaddr = wan:gwaddr(),
netmask = wan:netmask(),
dns = wan:dnsaddrs(),
expires = wan:expires(),
uptime = wan:uptime(),
proto = wan:proto(),
ifname = wan:ifname(),
link = wan:adminlink()
}
end
if wan6 then
rv.wan6 = {
ip6addr = wan6:ip6addr(),
gw6addr = wan6:gw6addr(),
dns = wan6:dns6addrs(),
uptime = wan6:uptime(),
ifname = wan6:ifname(),
link = wan6:adminlink()
}
end
luci.http.prepare_content("application/json")
luci.http.write_json(rv)
return
end
local system, model = luci.sys.sysinfo()
(Last edited by filipeobernardes on 12 Mar 2014, 20:19)