Hi there,
I am trying to unbrick my new WR710N router. I followed the instructions in the wiki:
http://wiki.openwrt.org/toh/tp-link/tl-wr710n
I have a logilink serial adapter: http://2direct.de/i-sell2u/images/daten … U0002B.pdf
I soldered a SUB-D 9 Pin female port as following:
Pin 2 (RXD) TP_IN
Pin 3 (TXD) TP_OUT
Pin 5 (GND) [See Picture]
My serial console is putty. There I used this settings:
COM6
Speed: 115200
Data bits: 8
Stop bits: 1
Parity: None
Flow control: XON/XOFF
I also configured this settings for the serial port in device manager: Screenshot
But all I get in putty is binary bullshit :-/ What could be wrong?
(Same situation when using ubuntu: Screenshot)
(Last edited by Reini on 2 Jan 2014, 12:35)