Hey,
I'm trying to use my 3G USB stick to provide internet to the router.
No ttyUSBx device's showing...
I installed usb-modeswith to support this modem's usb flip-flop (cdrom/3g modem) operation.
The router: TP-Link TL-WDR4300
OpenWRT Barrier Breaker - Trunk - r38999
The USB stick: Novatel MC950D
root@OpenWrt:/dev# lsusb
Bus 001 Device 002: ID 05e3:0608 Genesys Logic, Inc. USB-2.0 4-Port HUB
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 003: ID 0781:5571 SanDisk Corp. Cruzer Fit
Bus 001 Device 005: ID 1410:4400 Novatel Wireless Ovation MC930D/MC950D
root@OpenWrt:/dev# dmesg |tail
[ 29.030000] device wlan0 entered promiscuous mode
[ 29.040000] br-lan: port 3(wlan0) entered forwarding state
[ 29.040000] br-lan: port 3(wlan0) entered forwarding state
[ 29.320000] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 31.040000] br-lan: port 3(wlan0) entered forwarding state
[ 129.450000] usb 1-1.2: new full-speed USB device number 4 using ehci-platform
[ 129.580000] usb-storage 1-1.2:1.0: USB Mass Storage device detected
[ 129.580000] scsi1 : usb-storage 1-1.2:1.0
[ 130.490000] usb 1-1.2: USB disconnect, device number 4
[ 131.750000] usb 1-1.2: new full-speed USB device number 5 using ehci-platform
root@OpenWrt:/dev# ls
bus mtd1 mtd5ro null shm ttyS15 urandom
console mtd1ro mtdblock0 port tty ttyS2 watchdog
cpu_dma_latency mtd2 mtdblock1 ppp ttyS0 ttyS3 zero
full mtd2ro mtdblock2 ptmx ttyS1 ttyS4
kmsg mtd3 mtdblock3 pts ttyS10 ttyS5
log mtd3ro mtdblock4 random ttyS11 ttyS6
mem mtd4 mtdblock5 sda ttyS12 ttyS7
mtd0 mtd4ro network_latency sda1 ttyS13 ttyS8
mtd0ro mtd5 network_throughput sg0 ttyS14 ttyS9
Installed opkg packages:
http://pastebin.com/81iGUGHs
Any help will be highly appreciated.
Best Regards,
Yoav.