OpenWrt Forum Archive

Topic: OpenWrt on Linksys PAP2 ?

The content of this topic has been archived on 17 Apr 2018. There are no obvious gaps in this topic, but there may still be some posts missing at the end.

Post #1
bunyman
8 Apr 2008, 22:20

Hello all,

I'm looking for informations on the wiki about port of OpenWrt on Linksys PAP2, and nothing.

No project about that ?

Buny

Post #2
Vadim Guslistov
6 Dec 2013, 11:14

Hello all,

so anyone ported OpenWRT on Cisco SPA3000?

Post #3
mazilo
6 Dec 2013, 14:41
bunyman wrote:

I'm looking for informations on the wiki about port of OpenWrt on Linksys PAP2, and nothing.

Which version of PAP2? For a Linksys PAP2v1, you can forget about it.

For a Linksys PAP2v2, there may be a chance since its hardware resemblances to the hardware used by a Linksys RTP300 (minus the switches). You certainly can try to hack a Linksys PAP2v2 to run OpenWRT, but the end product will probably won't be fast mainly because the CPU is clocked @180MHz if not less. OTOH, you will probably need to port the Legarity voice module GPLed source to OpenWRT too so that it will be able to drive the PAP2v2 voice module.

The discussion might have continued from here.