OpenWrt Forum Archive

Topic: support TP-Link TL-WVR450G

The content of this topic has been archived on 28 Mar 2018. There are no obvious gaps in this topic, but there may still be some posts missing at the end.

I want to use openwrt at tp-link tl-wvr450g.

Can you support this device?

Hardware info

Atheros AR-9344  mips32 560 Mhz CPU.
Atheros 9381-AL1A - wireless
Atheros AR8327N-AL1A lan/wan
1 console port
128mb(1Gbit) ddr-II ram  - Hynix-HYNH5PS5162GFRY5C -DRAM Chip DDR2 SDRAM 512M-Bit 32Mx16 1.8V 84-Pin FBGA * 2
16Mbyte flash -  SPANSION - FL 128SAIFOO


-------------------------------------------------------------------------------------------------------------------------------------------------------
TP-LINK > en
Enter password:
TP-LINK # sys reboot
This command will reboot system, Continue? [Y/N]: y



           Copyright(C) 2001-2012 by TP-LINK TECHNOLOGIES CO., LTD.

         ________  ________             __      __  ____   _  __   ___
        |________||   ___  |           |  |    |  ||    \ | ||  | /  /
           |  |   |  |___| |   __ __   |  |    |  ||     \| ||  |/  /
           |  |   |   _____|  |__ __|  |  |___ |  || |\     ||      \
           |__|   |__|                 |______||__||_| \____||__|\___\


                            Software Platform for MIPS


U-Boot 1.1.4 (Jul  4 2012 - 09:32:32)

Autobooting in 1 seconds
ar9344> printenv
bootargs=console=ttyS0,115200 root=31:02 rootfstype=jffs2 init=/sbin/init mtdparts=ath-nor0:256k(u-boot),64k(u-boot-env),6336k(rootfs),1408k(uImage),64k(mib0),64k(ART)
bootcmd=calibrate normal;go 0x9f040000
bootdelay=1
baudrate=115200
ethaddr=0x00:0xaa:0xbb:0xcc:0xdd:0xee
ipaddr=192.168.1.10
serverip=192.168.1.27
dir=
lu=tftp 0x80060000 ${dir}u-boot.bin&&erase 0x9f000000 +$filesize&&cp.b $fileaddr 0x9f000000 $filesize
lf=tftp 0x80060000 ${dir}db12x${bc}-jffs2&&erase 0x9f050000 +0x630000&&cp.b $fileaddr 0x9f050000 $filesize
lk=tftp 0x80060000 ${dir}vmlinux${bc}.lzma.uImage&&erase 0x9f680000 +$filesize&&cp.b $fileaddr 0x9f680000 $filesize
stdin=serial
stdout=serial
stderr=serial
ethact=eth0

Environment size: 698/65532 bytes

----------------------------------------------------------------------------------------------------------------------------

(Last edited by remzi.akyuz on 1 Oct 2013, 15:03)

The discussion might have continued from here.