Topic: Technicolor TG582n (BCM63281) and OpenWRT
I just got one of these and I never liked the stock Alcatel/Thomson firmware. I started an article @ the wiki: TG582n (based on a draft @ http://wiki.openwrt.org/tg582n by a fellow member). I'll do some soldering later this week and I'll update as I go.
If anyone else is testing OpenWRT on TG582n, please post any info/feedback here.
Some quick info on the TG582n:
-They come in 2 hardware/board variants, DANT-T (8MB Flash) or DANT-1 (16MB Flash). The stock firmware images are not interchangeable between the different boards.
-I've only quickly poked around but other than the Flash chip the rest of the hardware looks identical, ditto for the pcb layout
Serial port @ J3
JTAG @ J4
JTAG pinout: 8 - N/C (Diode missing to 3.3V) 7 - TDI 6 - TDO 5 - GND 4 - TMS 3 - TCK 2 - N/C (3.3V Pullup / Possible nTRST) 1 - N/C (resistor missing to 3.3V)