1 (edited by cvanya 2013-08-10 20:19:58)

Topic: add support Dlink DIR-615 K1

Please add support DIR 615 k1

Source code

http://pmdap.dlink.com.tw/PMD/GetAgileF … 66170286E8

2 (edited by cvanya 2013-08-10 19:50:40)

Re: add support Dlink DIR-615 K1

DIR 615 K1

DIR 615 K1 2


DIR 615 K1 3

Re: add support Dlink DIR-615 K1

Agree! Plz, compile some openwrt for it)

there is no knowledge that is not power

Re: add support Dlink DIR-615 K1

No one even cared to post hardware details?
https://wikidevi.com/wiki/D-Link_DIR-615_rev_K1
https://wikidevi.com/wiki/D-Link_DIR-615_rev_K2
It seems K1 and K2 are identical. Both are BCM5357C0 based.

It seems D-Link doesn't use any own headers. Just install standard trx file (openwrt-brcm47xx-squashfs.trx). It may be worth to use serial console in case something goes wrong.

Re: add support Dlink DIR-615 K1

Has anyone tried to install openwrt-brcm47xx-squashfs.trx
It turned out to deliver? Working?

6 (edited by b1den 2016-05-04 13:47:19)

Re: add support Dlink DIR-615 K1

openwrt-brcm47xx-squashfs.trx wifi not working.
found tomato working firmware at http://tomato.groov.pl/download/K26RT-N … niIPv6.zip

after flashing connect to router via open wifi and WAN -> Bridge WAN port to primary LAN (br0).

http://i.imgur.com/bOs9pfx.png

Re: add support Dlink DIR-615 K1

b1den wrote:

openwrt-brcm47xx-squashfs.trx wifi not working.

I'm glad it booted smile Can you check if this device contains NVRAM "model_name" entry? Simply execute "nvram get model_name" command. If not, can you provide whole NVRAM content using "nvram show" command?

8 (edited by b1den 2016-05-05 06:47:14)

Re: add support Dlink DIR-615 K1

http://pastebin.com/fB75JApA - Tomato nvram
You need openwrt nvram?

Re: add support Dlink DIR-615 K1

b1den wrote:

http://pastebin.com/fB75JApA - Tomato nvram

Unfortunately, there doesn't seem to be any device specific entry sad I guess we can only use board* variables to detect this device:

boardtype=0x058e
boardnum=0015
boardrev=0x1153
b1den wrote:

You need openwrt nvram?

No, it won't be any different.

10 (edited by z0mbanbaradueff 2016-05-16 08:45:21)

Re: add support Dlink DIR-615 K1

615 K1
Flashed this Tomato  firmware.
Lan ports (numbered like on tomato screeen not like in router) not working.
Wan (lan4 on router) working.
Wifi working.

Re: add support Dlink DIR-615 K1

z0mbanbaradueff wrote:

615 K1
Flashed this Tomato  firmware.
Lan ports (numbered like on tomato screeen not like in router) not working.
Wan (lan4 on router) working.
Wifi working.

Report it to Tomato team.