OpenWrt Forum Archive

Topic: TL-WDR4300, what's my actual hardware rev?

The content of this topic has been archived on 31 Mar 2018. There are no obvious gaps in this topic, but there may still be some posts missing at the end.

Post #1
TCM1
2 Aug 2013, 22:13

Hi,

the sticker on the back says "Ver: 1.5". When opening the case, the board reads in the lower right "2050500272 Rev:1.3".

Device was bought today. Regarding the wiki entry at http://wiki.openwrt.org/toh/tp-link/tl-wdr4300 what does the Version/Model column actually refer to - in my case 1.5 or 1.3?

Thanks

Edit: Yet another thing: the sticker on the yellow switch module reads: "TL-WDR4300 VER: 1.4 [...]". They sure know how to confuse.

(Last edited by TCM1 on 2 Aug 2013, 22:16)

Post #2
TCM1
3 Aug 2013, 11:02

I installed trunk today, went fine. The device is now serving 4 WLANs (private + guest, each in 2.4GHz and 5GHz band) bridged to two VLANs and a management VLAN all tagged over the WAN port. The 4 LAN ports are unassigned and lead nowhere.

The discussion might have continued from here.