this my first time try to put two thing togher,with a afternoon time,i did it:)
(Last edited by slboat on 15 May 2013, 13:51)
The content of this topic has been archived on 5 Mar 2018. There are no obvious gaps in this topic, but there may still be some posts missing at the end.
this my first time try to put two thing togher,with a afternoon time,i did it:)
(Last edited by slboat on 15 May 2013, 13:51)
i still work it with ttl,and i wana make reset reset the power,its kind trick:)
http://see.sl088.com/wiki/WR703_%E8%8A% … 6%E6%88%90
the full process i put on my site,and with the furter upgrade.
MR3020:
WR740N:
WDR3600:
@slboat: could you also give a short explanation why you need an external flash socket and sacrificed the ethernet port for it?
Actually, I like the flash socket.
But as MBS says, why sacrifice the ethernet?
devil's advocate says that if you are screwing around with flash so much that you need a socket, then you should know how to use serial recovery
Thats what confuses me: no external ethernet, no external serial, wifi normally off by default or in failsafe - how to communicate with the device in the first place?
@slboat: could you also give a short explanation why you need an external flash socket and sacrificed the ethernet port for it?
the only reason to me,it's make a hole is sacrificed the small box for the wr703.
i not need use the lan,and if bad thing happen,i can push the reset button more than 10second to reset everything,i mean if really bad thing happens.
but mostly,the first config to me,its just need use the inside ttl cable to do that work.
here is the reset inside ttl work:
MR3020:
WR740N:
WDR3600:
that's very nice mod,and nice picture.and the inside ttl board is cool idea too:)
The discussion might have continued from here.