Hi all,
I'm new here, so sorry if the post is not fully correct. I'm trying to configura an Onda TM201 3g modem on a fonera 2.0n with OpenWRT rc2 - ATTITUDE ADJUSTMENT (12.09, r36088).
I reach this pont:

dmesg output:

[   10.200000] usbcore: registered new interface driver usbserial
[   10.220000] USB Serial support registered for generic
[   10.230000] usbcore: registered new interface driver usbserial_generic
[   10.240000] usbserial: USB Serial Driver core
[   10.330000] USB Serial support registered for IPWireless converter
[   10.340000] usbcore: registered new interface driver ipwtty
[   10.350000] ipw: v0.4:IPWireless tty driver
[   10.450000] USB Serial support registered for GSM modem (1-port)
[   10.460000] usbcore: registered new interface driver option
[   10.470000] option: v0.7.2:USB Driver for GSM modems
[   10.540000] usb 1-1: new high-speed USB device number 2 using dwc_otg

lsusb:

Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 1ee8:0064 ONDA COMMUNICATION S.p.a.

logread:
May 17 18:15:35 OpenWrt daemon.notice pppd[3083]: pppd 2.4.5 started by root, uid 0
May 17 18:15:36 OpenWrt local2.info chat[3087]: abort on (BUSY)
May 17 18:15:36 OpenWrt local2.info chat[3087]: abort on (NO CARRIER)
May 17 18:15:36 OpenWrt local2.info chat[3087]: abort on (ERROR)
May 17 18:15:36 OpenWrt local2.info chat[3087]: report (CONNECT)
May 17 18:15:36 OpenWrt local2.info chat[3087]: timeout set to 10 seconds
May 17 18:15:36 OpenWrt local2.info chat[3087]: send (AT&F^M)
May 17 18:15:36 OpenWrt local2.info chat[3087]: expect (OK)
May 17 18:15:46 OpenWrt local2.info chat[3087]: alarm
May 17 18:15:46 OpenWrt local2.info chat[3087]: Failed
May 17 18:15:46 OpenWrt daemon.err pppd[3083]: Connect script failed

I also configure everything on the online, but is still not working.

Can anyone help me?

Thanks so much

(Last edited by geppo on 17 May 2013, 17:35)