Hello!
I have a EOC2611P access point from Senao, the green led lights are on but i can't get access to the GUI anymore, here is a screenshot of a few tests i made, any suggestions/tip i could try? Thank you
Sorry my first post, i see there is no option to upload images here .....
I will try to copy the information of the 2 dos screens:
192.168.1.1 - PuTTY
^C== Executing boot script in 0.210 seconds - enter ^C to abort
^C
RedBoot> fis list
^C
RedBoot> Name FLASH addr Mem addr Length Entry point
RedBoot 0xA8000000 0xA8000000 0x00030000 0x00000000
FIS directory 0xA87E0000 0xA87E0000 0x0000F000 0x00000000
RedBoot config 0xA87EF000 0xA87E0000 0x00001000 0x00000000
RedBoot>
and this is the second test:
Microsoft Windows [Version 6.0.6002]
Copyright (c) 2006 Microsoft Corporation. All rights reserved.
C:\Users\User>ping 192.168.1.1
Pinging 192.168.1.1 with 32 bytes of data:
Reply from 192.168.1.1: bytes=32 time=8ms TTL=64
Reply from 192.168.1.1: bytes=32 time=11ms TTL=64
Reply from 192.168.1.1: bytes=32 time<1ms TTL=64
Reply from 192.168.1.1: bytes=32 time=9ms TTL=64
Ping statistics for 192.168.1.1:
Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 0ms, Maximum = 11ms, Average = 7ms
C:\Users\User>_