OpenWrt Forum Archive

Topic: TP-Ling WDR 3600 with GPRSmodem

The content of this topic has been archived on 21 Apr 2018. There are no obvious gaps in this topic, but there may still be some posts missing at the end.

Hello

I have a TP-link WDR3600
I have connected on the serial port prototype boards with siemens MC45 GPRS modem
I needed to have a free serial port for communication with modem

without:

BusyBox v1.19.4 (2013-02-13 15:14:11 CET) built-in shell (ash)
Enter 'help' for a list of built-in commands.

  _______                     ________        __
|       |.-----.-----.-----.|  |  |  |.----.|  |_
|   -   ||  _  |  -__|     ||  |  |  ||   _||   _|
|_______||   __|_____|__|__||________||__|  |____|
          |__| W I R E L E S S   F R E E D O M
-----------------------------------------------------
ATTITUDE ADJUSTMENT (Attitude Adjustment, r35531)
-----------------------------------------------------
  * 1/4 oz Vodka      Pour all ingredients into mixing
  * 1/4 oz Gin        tin with ice, strain into glass.
  * 1/4 oz Amaretto
  * 1/4 oz Triple sec
  * 1/4 oz Peach schnapps
  * 1/4 oz Sour mix
  * 1 splash Cranberry juice
-----------------------------------------------------
root@OpenWrt:/#

I already did it once but I lost the note as I did.
I do not mind the first boot:

U-Boot 1.1.4 (May  8 2012 - 12:30:02)

U-boot DB120


DRAM:  128 MB
id read 0x100000ff
flash size 8MB, sector count = 128
Flash:  8 MB
Using default environment

In:    serial
Out:   serial
Err:   serial
Net:   ag934x_enet_initialize...
No valid address in Flash. Using fixed address
wasp  reset mask:c03300
WASP  ----> S17 PHY *
: cfg1 0x7 cfg2 0x7114
eth0: ba:be:fa:ce:08:41
athrs17_reg_init: complete
eth0 up
eth0
Autobooting in 1 seconds
## Booting image at 9f020000 ...
   Uncompressing Kernel Image ... OK

Starting kernel ...

[    0.000000] Linux version 3.3.8 (lubi@lubi-desktop) (gcc version 4.6.3 20120201 (prerelease) (Linaro GCC 4.6-2012.02) ) #12 Thu Feb 14 13:22:30 CET 2013
[    0.000000] bootconsole [early0] enabled...



I need it make to building of image

WDR3600_GPRS

(Last edited by jurajberner on 14 Feb 2013, 15:59)

maybe one of my previous posts could be of help.

The discussion might have continued from here.