hi there,
i'd like to create a buildroot for the brand new WNDR3700v4
i connected via jtag - rs232 - usb to the boot console, here some parts from the output:
grep 'AR'
Booting Atheros AR934x (ToH -> o.k.)
Atheros on-chip NAND FLash Controller Driver, Version 0.1 (c) 2010 Atheros Communications, Ltd.
Ath Nand ID[878555a0]: 2c:f1:80:95:02
ONFI MICRON MT29F1G08ABADAWP
Micron NAND 128MiB 3,3V 8-bit [128MB]
12 cmdlinepart partitions found on MTD device ath-nand
Creating 12 MTD partitions on "ath-nand":
0x000000000000-0x000000040000 : "u-boot"
0x000000040000-0x000000080000 : "u-boot-env"
0x000000080000-0x0000000c0000 : "caldata"
0x0000000c0000-0x000000140000 : "pot"
0x000000140000-0x000000340000 : "language"
0x000000340000-0x0000003c0000 : "config"
0x0000003c0000-0x0000006c0000 : "traffic_meter"
0x0000006c0000-0x0000007e0000 : "kernel"
0x0000007e0000-0x000001fc0000 : "rootfs"
What will be the next step ?
There is allready an openwrt running on the machine - netgear didn't respond to my quest for making there buldroot available to the community, yet.
sunshine !
flo
(Last edited by staar on 14 Dec 2012, 12:14)