Taken from default WWW application:
Firmware Version: 3.13.27 Build 120905 Rel.73281n
Hardware Version: MR3420 v2 00000000
The content of this topic has been archived between 9 Aug 2014 and 22 Apr 2018. Unfortunately there are posts – most likely complete pages – missing.
Taken from default WWW application:
Firmware Version: 3.13.27 Build 120905 Rel.73281n
Hardware Version: MR3420 v2 00000000
Taken from default WWW application:
Firmware Version: 3.13.27 Build 120905 Rel.73281n
Hardware Version: MR3420 v2 00000000
If your current fw is TP-LINK stock firmware , you can flash openwrt from router CP web interface.
Hmm...
maybe I'm doing sth wrong... When I'm trying to flash openwrt-ar71xx-generic-tl-mr3420-v2-squashfs-factory.bin from http://openwrt.agromapia.com/firmware/aarc1/ then I've got:
Error code: 18005
Upgrade unsuccessfully because the version of the upgraded file was incorrect. Please check the file name.
Any ideas?
Hmm...
maybe I'm doing sth wrong... When I'm trying to flash openwrt-ar71xx-generic-tl-mr3420-v2-squashfs-factory.bin from http://openwrt.agromapia.com/firmware/aarc1/ then I've got:
Error code: 18005
Upgrade unsuccessfully because the version of the upgraded file was incorrect. Please check the file name.Any ideas?
It maybe the header still shows 841v8 , it looks like the patch need addtional correction to show the header is for 3420v2.
(Last edited by xopal on 10 Jan 2013, 23:44)
Hmm...
maybe I'm doing sth wrong... When I'm trying to flash openwrt-ar71xx-generic-tl-mr3420-v2-squashfs-factory.bin from http://openwrt.agromapia.com/firmware/aarc1/ then I've got:
Error code: 18005
Upgrade unsuccessfully because the version of the upgraded file was incorrect. Please check the file name.Any ideas?
Check for md5sums probably your file is incomplete or download file via box.com link.
All file is 100% field tested & Work + Enable upgrade via TPLINK factory firmware.
Video
[video]http://www.youtube.com/watch?v=XosbtifW … e=youtu.be[/video]
(Last edited by cindy.wijaya on 11 Jan 2013, 00:21)
System
Router Name OpenWrt
Router Model TP-Link TL-MR3420 v2
Firmware Version OpenWrt Attitude Adjustment 12.09-rc1 - OpenWrtID / LuCI 0.11 Branch (0.11+svn9599)
Kernel Version 3.3.8
Local Time Fri Jan 11 06:15:31 2013
:D
Cindy and xopal - thanks!!
previous firmware file was incomplete. I downloaded it again from second server.
(Last edited by martek1 on 11 Jan 2013, 00:15)
Right now,wan led is off when connected.But when LAN4 is connected,wan led can blink.Perhaps it is a bug from AA.
(Last edited by axishero on 11 Jan 2013, 04:53)
Right now,wan led is off when connected.But when LAN4 is connected,wan led can blink.Perhaps it is a bug from AA.
not bug if you plug lan1-4 wan led will turn/blin on not only lan4=> actually this is little mistake
change setting WAN LED:
from: eth1
to: eth0
then WAN LED will turn on/blink if you plug cable to WAN PORT
Hi anyone going to submit patches?
Thanks!
Hi,
I flashed my mr3420 v.2 without problems, but when i try to install ppp-mod-pptp for pptp connection there
is no memory space available on device. Is it possible to receive an image without 3g or usb support ?
Best Regards
Quickest way and most versatile is to just compile your own.
Hi,
I bought a TP-Link MR3220V2 last week and I flashed it with the build from this thread. I haven’t used openwrt before so I thought I would ask the forum about some network configuration hints. I want to use my MR3220 as a wifi dhcp client to an existing network. I plan to use it as a wireless “brain” to a USB project that I’m currently working on. I’m not interested in the switch ports of the MR3220V2. I tried to follow the guide for Routed Client Using MASQUERADE, since that seems to be one possible solution, but I couldn’t get it to work.
http://wiki.openwrt.org/doc/recipes/rou … masquerade
Does anyone on this forum have some tips on how to configure my router?
pd, I suggest you start a new thread.
Also, explain what went wrong and any error messages.
If you did something differently to the instructions in the link, mention that too.
The instructions are pretty clear.
Finished my memory mod on 3420v2 with Hynix HY5DU121622DTP-D43
U-Boot 1.1.4 (Jul 3 2012 - 15:12:08)
U-boot AP123
DRAM: 64 MB
id read 0x100000ff
Flash: 4 MB
Using default environment
In: serial
Out: serial
Err: serial
Net: ag934x_enet_initialize...
wasp reset mask:c03300
WASP ----> S27 PHY
GMAC: cfg1 0x5 cfg2 0x7114
eth0: ba:be:fa:ce:08:41
s27 reg init
athrs27_phy_setup ATHR_PHY_CONTROL 4: 0x1000
athrs27_phy_setup ATHR_PHY_SPEC_STAUS 4: 0x10
eth0 up
WASP ----> S27 PHY
GMAC: cfg1 0xf cfg2 0x7214
eth1: ba:be:fa:ce:08:41
s27 reg init lan
ATHRS27: resetting s27
ATHRS27: s27 reset done
.
.
.
root@OpenWrt:/# free
total used free shared buffers
Mem: 61812 24588 37224 0 2552
-/+ buffers: 22036 39776
Swap: 10236 0 10236
Hi,
How can I reset my MR3420 V2 from openwrt to TP-Link firmware?
THX,
R
Download firmware: http://www.tp-link.com/Resources/softwa … 121206.zip (the filename contains "boot" & the size=4063744)
So
Cut the first 0x20200 (that is 131,584 = 257*512) Bytes from original firmware
Linux: dd if=orig.bin of=tplink.bin skip=257 bs=512 (source: http://wiki.openwrt.org/toh/tp-link/tl-wr1043nd )
Win: Hexedit will do.
Flash the stripped file (size=3932160)
Voila.
R
(Last edited by rjanossy on 24 Jan 2013, 10:59)
Hello. Two days ago I had setuped firmware fw-rel.3-prosum (openwrt-ar71xx-generic-tl-mr3420-v2-squashfs-factory).
Router Model TP-Link TL-MR3420 v2
Firmware Version OpenWrt Attitude Adjustment 12.09-rc1 - OpenWrtID / LuCI 0.11 Branch (0.11+svn9599)
After tplink firmware it's a dream. No one disconnect of YOTA ONE LTE modem.
All devices good working by LAN and wi-fi besides one android smartphone - SonyEricsson Xperia Active (4.0.1). Alltime it's disconnecting and connecting again (and phone battery ends after 5 hours:) ).
I tried wpa2, wpa, wpa+wpa2, tkip, aes, auto, 1 channel, 9 channel. After googling, I try to set option wpa_group_rekey to '0' and to '3600' - no offect.
option wpa_group_rekey '0'
Log:
Jan 23 17:10:53 TP-LINK_MR3420V2 daemon.info hostapd: wlan0: STA 90:c1:15:cb:84:5a IEEE 802.11: authenticated
Jan 23 17:10:53 TP-LINK_MR3420V2 daemon.info hostapd: wlan0: STA 90:c1:15:cb:84:5a IEEE 802.11: associated (aid 1)
Jan 23 17:10:53 TP-LINK_MR3420V2 daemon.info hostapd: wlan0: STA 90:c1:15:cb:84:5a WPA: pairwise key handshake completed (RSN)
Jan 23 17:10:53 TP-LINK_MR3420V2 daemon.info dnsmasq-dhcp[2914]: DHCPREQUEST(br-lan) 192.168.5.21 90:c1:15:cb:84:5a
Jan 23 17:10:53 TP-LINK_MR3420V2 daemon.info dnsmasq-dhcp[2914]: DHCPACK(br-lan) 192.168.5.21 90:c1:15:cb:84:5a Andoid-Sony-Active
Jan 23 17:11:36 TP-LINK_MR3420V2 daemon.info hostapd: wlan0: STA 90:c1:15:cb:84:5a IEEE 802.11: authenticated
Jan 23 17:11:36 TP-LINK_MR3420V2 daemon.info hostapd: wlan0: STA 90:c1:15:cb:84:5a IEEE 802.11: associated (aid 1)
Jan 23 17:11:36 TP-LINK_MR3420V2 daemon.info hostapd: wlan0: STA 90:c1:15:cb:84:5a WPA: pairwise key handshake completed (RSN)
Jan 23 17:11:36 TP-LINK_MR3420V2 daemon.info dnsmasq-dhcp[2914]: DHCPREQUEST(br-lan) 192.168.5.21 90:c1:15:cb:84:5a
Jan 23 17:11:36 TP-LINK_MR3420V2 daemon.info dnsmasq-dhcp[2914]: DHCPACK(br-lan) 192.168.5.21 90:c1:15:cb:84:5a Andoid-Sony-Active
Jan 23 17:11:50 TP-LINK_MR3420V2 daemon.info hostapd: wlan0: STA 90:c1:15:cb:84:5a IEEE 802.11: authenticated
Jan 23 17:11:50 TP-LINK_MR3420V2 daemon.info hostapd: wlan0: STA 90:c1:15:cb:84:5a IEEE 802.11: associated (aid 1)
Jan 23 17:11:50 TP-LINK_MR3420V2 daemon.info hostapd: wlan0: STA 90:c1:15:cb:84:5a WPA: pairwise key handshake completed (RSN)
Jan 23 17:11:50 TP-LINK_MR3420V2 daemon.info dnsmasq-dhcp[2914]: DHCPREQUEST(br-lan) 192.168.5.21 90:c1:15:cb:84:5a
Jan 23 17:11:50 TP-LINK_MR3420V2 daemon.info dnsmasq-dhcp[2914]: DHCPACK(br-lan) 192.168.5.21 90:c1:15:cb:84:5a Andoid-Sony-Active
Hi, I bought this router, but h/w version on sticker is 2.1. As topic name is "TP-Link TL-MR3420 V2 (2.1)" can i use last firmware to flash my router?
Thanks!
I have TP-Link TL-MR3420 V2 (2.1) router. I have download and install https://www.box.com/s/qebaprwq0798dyu19h1c/1/596285208. It is working perfectly. I can't install ppp-mod-pptp for pptp connection I'm getting libc error. and also space issue. my /tmp directory shows 14mb free. 1. can i add more space to root?
2. how to install ppp-mod-pptp
Thanks. Pls help me i'm new to openwrt.
/tmp is a RAM-disk, so everything stored in there will be lost on reboot. There are different ways to increase the space for the rootfs. The most convenient way is to connect an usb flash drive and use extroot (see the wiki for more information), but this might not the most stable solution. Other options are to replace the flash chip with one of a bigger capacity (mostly known as flash mod), but this requires at least the ability to backup a few partitions from the original flash to the replacement one. A third option is to connect a sd card to some free gpios (mmc over gpio are the key words).
Thanks for the information. I can configure extroot and have space. I need to install ppp-mod-pptp. plz help regarding this. It will ask libc dependance. But it has already installed.
make sure you are using the same packages as firmware. Get your firmware up to date and then run opkg update.
Then try installing the pptp kmod.
I'm using https://www.box.com/s/qebaprwq0798dyu19h1c/1/596285208 . Is there any new firmware available?
I am new here, but I managed to compile and install trunk on my MR3420-V1.3
After this success:
- I apply the patch without any errors.
- run make again
- the firmware for V2 was found in /bin
I use the V2 firmware to flash other MR3420 version V2.1 and the router is bricked.
What I did wrong?
I just submitted patch to openwrt dev. #12748 please be patient.