Hello ,
I am new to this forum.
I have one Wireless ADSL 2 + Modem with 4 Lan Port,1 USB Port,1 DSL port for ADSL inout, In built WI-FI for wireless.
Model Number DNA-A213 , SemIndia Systems ADSL Router
I want to run OpenWrt on this modem
Some output about HW configuration.
=~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2011.04.01 15:38:32 =~=~=~=~=~=~=~=~=~=~=~=
SemIndia Systems ADSL Router
BusyBox v1.00 (2009.06.26-03:42+0000) Built-in shell (msh)
Enter 'help' for a list of built-in commands.
# sysinfo
Number of processes: 30
5:30am up 5:30,
load average: 1 min:0.19, 5 min:0.06, 15 min:0.01
total used free shared buffers
Mem: 14004 13568 436 0 928
Swap: 0 0 0
Total: 14004 13568 436
# cat /pros/cpuinfo
system type : 96338W2
processor : 0
cpu model : BCM6338 V1.0
BogoMIPS : 239.20
wait instruction : no
microsecond timers : yes
tlb_entries : 32
extra interrupt vector : yes
hardware watchpoint : no
unaligned access : 498192
VCED exceptions : not available
VCEI exceptions : not available
# dmesg
Linux version 2.6.8.1 (root@localhost.localdomain) (gcc version 3.4.2) #1 Fri Jun 26 09:04:39 IST 2009
device id 0
device id 0
device id 0
device id 1021500
spi_flash_init: device id 115
In Spansion part
Serial flash device: name S25FL032A, id 0x0115, size 4096KB
96338W2 prom init
CPU revision is: 00029010
Determined physical RAM map:
memory: 00fa0000 @ 00000000 (usable)
On node 0 totalpages: 4000
DMA zone: 4000 pages, LIFO batch:1
Normal zone: 0 pages, LIFO batch:1
HighMem zone: 0 pages, LIFO batch:1
Built 1 zonelists
Kernel command line: root=31:0 ro noinitrd console=ttyS0,115200
brcm mips: enabling icache and dcache...
Primary instruction cache 16kB, physically tagged, 2-way, linesize 16 bytes.
Primary data cache 8kB 2-way, linesize 16 bytes.
PID hash table entries: 64 (order 6: 512 bytes)
Using 120.000 MHz high precision timer.
Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
Memory: 13916k/16000k available (1443k kernel code, 2064k reserved, 212k data, 68k init, 0k highmem)
KLOB Pool 1 Initialized: 1048576 bytes <0x80e00000 ... 0x80f00000>
Calibrating delay loop... 239.20 BogoMIPS
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
Checking for 'wait' instruction... unavailable.
NET: Registered protocol family 16
Total Flash size: 4096K with 64 sectors
File system address: 0xbfc10100
Can't analyze prologue code at 80177764
Initializing Cryptographic API
PPP generic driver version 2.4.2
NET: Registered protocol family 24
Using noop io scheduler
bcm963xx_mtd driver v1.0
brcmboard: brcm_board_init entry
SES: Button Interrupt 0x0 is enabled
SES: LED GPIO 0x8005 is enabled
Serial: BCM63XX driver $Revision: 3.00 $
ttyS0 at MMIO 0xfffe0300 (irq = 10) is a BCM63XX
NET: Registered protocol family 2
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 512 bind 1024)
Initializing IPsec netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
NET: Registered protocol family 15
Ebtables v2.0 registered
NET: Registered protocol family 8
NET: Registered protocol family 20
802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
All bugs added by David S. Miller <davem@redhat.com>
VFS: Mounted root (squashfs filesystem) readonly.
Freeing unused kernel memory: 68k freed
Algorithmics/MIPS FPU Emulator v1.5
atmapi: module license 'Proprietary' taints kernel.
adsl: adsl_init entry
*** dslThread dslPid=51
blaadd: blaa_detect entry
Broadcom BCMPROCFS v1.0 initialized
dgasp: kerSysRegisterDyingGaspHandler: wl0 registered
Trying to free free IRQ25
Broadcom BCM6338A2 Ethernet Network Device v0.3 Jun 26 2009 09:01:50
Config Ethernet Switch Through MDIO Pseudo PHY Interface
ethsw: found bcm5325e!
dgasp: kerSysRegisterDyingGaspHandler: eth0 registered
eth0: MAC Address: 00:1B:57:E8:2F:06
Broadcom BCM6338A2 USB Network Device v0.4 Jun 26 2009 09:01:54
usb0: MAC Address: 00 1B 57 E8 2F 07
usb0: Host MAC Address: 00 1B 57 E8 2F 08
BcmAdsl_Initialize=0xC00715A8, g_pFnNotifyCallback=0xC0092B74
pSdramPHY=0xA0FFFFF8, 0x0 0x0
AdslCoreSharedMemInit: shareMemAvailable=4608
AdslCoreHwReset: AdslOemDataAddr = 0xA0FF3BB4
dgasp: kerSysRegisterDyingGaspHandler: dsl0 registered
ATM proc init !!!
ip_tables: (C) 2000-2002 Netfilter core team
ip_conntrack version 2.1 (125 buckets, 0 max) - 368 bytes per conntrack
Line 0: xDSL G.994 training
ip_conntrack_pptp version 2.1 loaded
ip_nat_pptp version 2.0 loaded
BRCM NAT Caching v1.0 Jul 18 2008 14:00:36
BRCM NAT Cache: Hooking hit function @ c0063088
ip_conntrack_rtsp v0.01 loading
ip_nat_rtsp v0.01 loading
device usb0 entered promiscuous mode
br0: port 1(usb0) entering learning state
br0: topology change detected, propagating
br0: port 1(usb0) entering forwarding state
br0: port 1(usb0) entering disabled state
br0: port 1(usb0) entering learning state
br0: topology change detected, propagating
br0: port 1(usb0) entering forwarding state
Line 0: ADSL G.992 started
device wl0 entered promiscuous mode
device wl0.1 entered promiscuous mode
device wl0.2 entered promiscuous mode
br0: port 2(wl0) entering learning state
br0: topology change detected, propagating
br0: port 2(wl0) entering forwarding state
br0: port 3(wl0.1) entering learning state
br0: topology change detected, propagating
br0: port 3(wl0.1) entering forwarding state
br0: port 4(wl0.2) entering learning state
br0: topology change detected, propagating
br0: port 4(wl0.2) entering forwarding state
Line 0: ADSL G.992 channel analysis
eth0.2: MAC Address: 00:1B:57:E8:2F:06
eth0.3: MAC Address: 00:1B:57:E8:2F:06
eth0.4: MAC Address: 00:1B:57:E8:2F:06
eth0.5: MAC Address: 00:1B:57:E8:2F:06
device usb0 left promiscuous mode
br0: port 1(usb0) entering disabled state
device wl0 left promiscuous mode
br0: port 2(wl0) entering disabled state
device wl0.1 left promiscuous mode
br0: port 3(wl0.1) entering disabled state
device wl0.2 left promiscuous mode
br0: port 4(wl0.2) entering disabled state
device usb0 entered promiscuous mode
br0: port 1(usb0) entering learning state
br0: topology change detected, propagating
br0: port 1(usb0) entering forwarding state
device wl0 entered promiscuous mode
br0: port 2(wl0) entering learning state
br0: topology change detected, propagating
br0: port 2(wl0) entering forwarding state
device eth0.2 entered promiscuous mode
br0: port 3(eth0.2) entering learning state
br0: topology change detected, propagating
br0: port 3(eth0.2) entering forwarding state
device eth0.3 entered promiscuous mode
br1: port 1(eth0.3) entering learning state
br1: topology change detected, propagating
br1: port 1(eth0.3) entering forwarding state
device eth0.4 entered promiscuous mode
br2: port 1(eth0.4) entering learning state
br2: topology change detected, propagating
br2: port 1(eth0.4) entering forwarding state
device eth0.5 entered promiscuous mode
br0: port 4(eth0.5) entering learning state
br0: topology change detected, propagating
br0: port 4(eth0.5) entering forwarding state
device wl0.1 entered promiscuous mode
br0: port 5(wl0.1) entering learning state
br0: topology change detected, propagating
br0: port 5(wl0.1) entering forwarding state
device wl0.2 entered promiscuous mode
br0: port 6(wl0.2) entering learning state
br0: topology change detected, propagating
br0: port 6(wl0.2) entering forwarding state
Line 0: ADSL link up, Path 0, us=260, ds=2042
ATM Soft SAR: ATM link connected.
KLOB extended to 2 pools
br0: port 4(eth0.5) entering disabled state
br0: port 3(eth0.2) entering disabled state
br1: port 1(eth0.3) entering disabled state
br2: port 1(eth0.4) entering disabled state
br0: port 1(usb0) entering disabled state