Black Roland wrote:axishero, 0.9.3 version with standard init.d/dnscrypt-proxy script? I think 2053 port is already in use (# netstat -a -n for check), or permissions denied.
I am using the init script from your #1 post.
Dnscrypt can't be up at boot.But it can be up by ssh into and '/etc/init.d/dnscrypt-proxy start' after boot.For this case,it's running on tplink wr1041n which has only one switch named eth0 divided into eth0.1 and eth0.2 as wan and lan.
Unfortunately, I don't know reason of this problem, but you can try to change LISTEN_ADDR from 127.0.0.1 to 0.0.0.0 .
Also you can try to change START from 50 to 95 in init-script:
# grep START /etc/init.d/dnscrypt-proxy
START=50
# /etc/init.d/dnscrypt-proxy disable
# vi /etc/init.d/dnscrypt-proxy
# grep START /etc/init.d/dnscrypt-proxy
START=95
#/etc/init.d/dnscrypt-proxy enable